{"title":"All products","description":null,"products":[{"product_id":"3-1-dual-wall-adhesive-lined-heat-shrink-tubing-marine-grade-waterproof-polyolefin-heatshrink-for-electrical-cable-splicing-sealing","title":"3:1 Dual-Wall Adhesive-Lined Heat Shrink Tubing | Marine-Grade Waterproof Polyolefin Heatshrink for Electrical Cable Splicing \u0026 Sealing","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur 3:1 ratio dual-wall adhesive-lined heat shrink tubing is engineered for demanding electrical and environmental sealing applications where standard 2:1 tubing fails to deliver adequate coverage. Constructed with a cross-linked polyolefin outer jacket (UL VW-1 flame-retardant) and a thermoplastic hot-melt adhesive inner liner, this tubing provides a 3-to-1 shrink ratio, enabling it to conform tightly around large connectors, splices, and irregular cable geometries while delivering a hermetic, moisture-proof seal.\u003c\/p\u003e\n\u003cp\u003eUpon heat activation, the outer wall shrinks uniformly while the inner adhesive melts and flows, encapsulating the substrate and forming a durable, strain-relieved bond that resists water ingress, corrosion, vibration, and mechanical abrasion. Rated for continuous operation from -55°C to +125°C, the polyolefin outer wall meets UL 224 VW-1 flammability requirements and the assembly is fully RoHS and REACH compliant — making it suitable for marine, automotive, industrial control, and renewable energy installations.\u003c\/p\u003e\n\u003cp\u003eImportant Note: The UL 224 VW-1 flammability rating applies specifically to the outer polyolefin wall. The inner hot-melt adhesive layer is not flame-retardant and is designed primarily for environmental sealing and mechanical bonding. In applications requiring full assembly flame resistance, please verify suitability for your specific use case.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Shrink Ratio: 3:1 (recovers to 1\/3 of original diameter)\u003cbr\u003e• Wall Construction: Dual-wall structure\u003cbr\u003e  - Outer Wall: Cross-linked flame-retardant polyolefin (UL VW-1)\u003cbr\u003e  - Inner Liner: Hot-melt thermoplastic adhesive (non-flame-retardant)\u003cbr\u003e• Operating Temperature Range: -55°C to +125°C (continuous)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 70°C\u003cbr\u003e• Full Recovery Temperature: 125°C\u003cbr\u003e• Dielectric Strength: ≥ 15 kV\/mm (ASTM D2671)\u003cbr\u003e• Dielectric Constant: ≤ 2.8 @ 1 MHz\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Outer Wall Flammability: UL 224 VW-1 (vertical burn) — outer polyolefin layer only\u003cbr\u003e• Tensile Strength: ≥ 10.4 MPa (ASTM D2671)\u003cbr\u003e• Elongation at Break: ≥ 200%\u003cbr\u003e• Water Absorption: ≤ 0.5%\u003cbr\u003e• Copper Corrosion: Passes ASTM D2671\u003cbr\u003e• Fluid Resistance: Resistant to diesel, gasoline, hydraulic fluids, and mild acids\u003cbr\u003e• Certifications: UL Recognized (outer wall), RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Superior Conformability with 3:1 Recovery\u003cbr\u003eThe 3-to-1 shrink ratio allows a single tubing size to cover a wider range of cable diameters and large-diameter connectors — reducing SKU count and simplifying inventory management. Ideal for transition splices, molded connectors, and irregularly shaped components where 2:1 tubing cannot achieve full recovery.\u003c\/p\u003e\n\u003cp\u003e► Hermetic Environmental Sealing\u003cbr\u003eThe internal hot-melt adhesive liner melts at approximately 80°C and flows under shrink pressure, filling voids and bonding directly to the cable jacket and underlying substrate. The resulting seal provides IP67-equivalent moisture protection, preventing water intrusion, salt spray corrosion, and dust contamination in outdoor and submerged applications.\u003c\/p\u003e\n\u003cp\u003e► Enhanced Mechanical Strain Relief\u003cbr\u003eThe bonded adhesive layer creates a unified structure between the tubing and the cable, distributing mechanical stress across the splice junction. This significantly improves pull-out resistance and flex fatigue performance compared to non-adhesive tubing, extending service life in high-vibration environments.\u003c\/p\u003e\n\u003cp\u003e► Flame-Retardant Outer Layer\u003cbr\u003eThe polyolefin outer wall is formulated with flame-retardant additives and meets UL 224 VW-1 vertical burn requirements, ensuring compliance with NEC and international electrical safety standards for enclosed and industrial installations. Note: The inner adhesive layer is non-flame-retardant and contributes to sealing performance only.\u003c\/p\u003e\n\u003cp\u003e► Long-Term Thermal Stability\u003cbr\u003eThe cross-linked molecular structure of the outer wall provides excellent resistance to thermal aging, UV degradation, and thermal cycling — maintaining dielectric and mechanical integrity throughout the product's service life across the full -55°C to +125°C operating range.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINDUSTRY APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e⚓ Marine \u0026amp; Offshore\u003cbr\u003e• Boat wiring harnesses and navigation system splices\u003cbr\u003e• Bilge pump and transducer cable sealing\u003cbr\u003e• Saltwater-exposed electrical connections\u003cbr\u003e• Dockside and offshore platform instrumentation\u003c\/p\u003e\n\u003cp\u003e🚗 Automotive \u0026amp; Heavy-Duty Vehicles\u003cbr\u003e• Engine bay wiring and sensor connections\u003cbr\u003e• Trailer and towing harness repairs\u003cbr\u003e• Battery cable splices and terminal insulation\u003cbr\u003e• Off-road and agricultural equipment wiring\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial \u0026amp; Automation\u003cbr\u003e• PLC and control cabinet wiring\u003cbr\u003e• Motor lead and transformer connections\u003cbr\u003e• Conveyor and sensor cable splicing\u003cbr\u003e• Outdoor LED lighting and signage\u003c\/p\u003e\n\u003cp\u003e☀️ Renewable Energy\u003cbr\u003e• Solar panel string wiring and junction box connections\u003cbr\u003e• Wind turbine cable terminations\u003cbr\u003e• Inverter and charge controller wiring\u003c\/p\u003e\n\u003cp\u003e📡 Telecom \u0026amp; Data Infrastructure\u003cbr\u003e• Cell tower and base station cable sealing\u003cbr\u003e• Fiber optic buffer tube protection\u003cbr\u003e• Outdoor Ethernet and PoE cable splices\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (minimum 300°C output), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut tubing to length using a sharp blade or tubing cutter. Ensure a minimum overlap of 15–20 mm on each side of the splice or connector. Deburr cut edges to prevent tearing during recovery.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the cable and position it centrally over the splice, joint, or termination point before making the electrical connection.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat uniformly using a heat gun set to 300–350°C. Begin heating from the center of the tubing and work progressively outward toward each end. Maintain sufficient distance to avoid scorching while ensuring the adhesive reaches flow temperature.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until a continuous bead of adhesive extrudes from both ends of the tubing, confirming complete adhesive flow and a circumferential seal. The tubing should conform smoothly to the underlying profile with no wrinkles or bridging.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling \u0026amp; Inspection\u003cbr\u003eAllow the assembly to cool naturally. Inspect for full recovery, uniform adhesive coverage, and absence of voids or air bubbles. A properly installed joint will be rigid at the adhesive bond line with no movement under lateral stress.\u003c\/p\u003e\n\u003cp\u003eNote: Use of open-flame torches is not recommended for precision installations as localized overheating can degrade the adhesive and polyolefin material, compromising seal integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot undergoes dimensional verification, shrink ratio testing, and dielectric breakdown testing\u003cbr\u003e• Material traceability available upon request for qualified industrial customers\u003cbr\u003e• Custom lengths, colors, and printed marking available for volume orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 30m \/ 50m \/ 100m continuous lengths on plastic spools\u003cbr\u003e• Cut Pieces: Pre-cut segments in assorted lengths (customizable)\u003cbr\u003e• Kit Assortments: Multi-diameter organizer kits for service technicians\u003cbr\u003e• Private Label: Custom branding and packaging available for OEM and resale partners\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"φ1.6 \/ Black","offer_id":46269008740586,"sku":null,"price":0.9,"currency_code":"USD","in_stock":true},{"title":"φ1.6 \/ White","offer_id":46269008773354,"sku":null,"price":1.1,"currency_code":"USD","in_stock":true},{"title":"φ1.6 \/ Blue","offer_id":46269008806122,"sku":null,"price":1.1,"currency_code":"USD","in_stock":true},{"title":"φ2.4 \/ Black","offer_id":46269008838890,"sku":null,"price":0.7,"currency_code":"USD","in_stock":true},{"title":"φ2.4 \/ White","offer_id":46269008871658,"sku":null,"price":0.95,"currency_code":"USD","in_stock":true},{"title":"φ2.4 \/ Blue","offer_id":46269008904426,"sku":null,"price":0.95,"currency_code":"USD","in_stock":true},{"title":"φ3.2 \/ Black","offer_id":46269008937194,"sku":null,"price":0.78,"currency_code":"USD","in_stock":true},{"title":"φ3.2 \/ White","offer_id":46269008969962,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true},{"title":"φ3.2 \/ Blue","offer_id":46269009002730,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/3X4X.jpg?v=1789097955"},{"product_id":"4-1-dual-wall-adhesive-lined-heat-shrink-tubing-high-shrink-ratio-waterproof-polyolefin-heatshrink-for-large-connectors-cable-splicing","title":"4:1 Dual-Wall Adhesive-Lined Heat Shrink Tubing | High-Shrink Ratio Waterproof Polyolefin Heatshrink for Large Connectors \u0026 Cable Splicing","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur 4:1 ratio dual-wall adhesive-lined heat shrink tubing delivers the highest shrink ratio in our adhesive-lined product line, engineered specifically for applications involving large connectors, multi-conductor cable bundles, transition splices, and highly irregular geometries where 3:1 or 2:1 tubing cannot achieve full recovery. Constructed with a thick-walled cross-linked polyolefin outer jacket (UL VW-1 flame-retardant) and a generous hot-melt adhesive inner liner, this 4-to-1 tubing recovers to one quarter of its original diameter, creating a tight, uniform, and hermetically sealed bond.\u003c\/p\u003e\n\u003cp\u003eUpon heat activation, the heavy-gauge outer wall shrinks with exceptional force while the high-volume inner adhesive melts and flows, filling deep voids, encapsulating uneven surfaces, and bonding directly to the underlying cable jackets and substrates. The result is a durable, strain-relieved seal that resists water immersion, corrosion, vibration, and mechanical abrasion. Rated for continuous operation from -55°C to +125°C, the polyolefin outer wall meets UL 224 VW-1 flammability requirements and the assembly is fully RoHS and REACH compliant.\u003c\/p\u003e\n\u003cp\u003eImportant Note: The UL 224 VW-1 flammability rating applies specifically to the outer polyolefin wall. The inner hot-melt adhesive layer is not flame-retardant and is designed primarily for environmental sealing and mechanical bonding. In applications requiring full assembly flame resistance, please verify suitability for your specific use case.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Shrink Ratio: 4:1 (recovers to 1\/4 of original diameter)\u003cbr\u003e• Wall Construction: Dual-wall structure — heavy-gauge outer wall + high-volume adhesive liner\u003cbr\u003e  - Outer Wall: Cross-linked flame-retardant polyolefin (UL VW-1)\u003cbr\u003e  - Inner Liner: Hot-melt thermoplastic adhesive (non-flame-retardant)\u003cbr\u003e• Operating Temperature Range: -55°C to +125°C (continuous)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 70°C\u003cbr\u003e• Full Recovery Temperature: 125°C\u003cbr\u003e• Dielectric Strength: ≥ 15 kV\/mm (ASTM D2671)\u003cbr\u003e• Dielectric Constant: ≤ 2.8 @ 1 MHz\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Outer Wall Flammability: UL 224 VW-1 (vertical burn) — outer polyolefin layer only\u003cbr\u003e• Tensile Strength: ≥ 10.4 MPa (ASTM D2671)\u003cbr\u003e• Elongation at Break: ≥ 200%\u003cbr\u003e• Water Absorption: ≤ 0.5%\u003cbr\u003e• Copper Corrosion: Passes ASTM D2671\u003cbr\u003e• Fluid Resistance: Resistant to diesel, gasoline, hydraulic fluids, and mild acids\u003cbr\u003e• Certifications: UL Recognized (outer wall), RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Exceptional 4:1 Shrink Ratio for Maximum Versatility\u003cbr\u003eThe 4-to-1 recovery ratio is the highest available in adhesive-lined heat shrink tubing, allowing a single size to span an exceptionally wide range of cable diameters. This makes it ideal for transition splices, large molded connectors, multi-cable bundles, and highly irregular shapes where 3:1 tubing still cannot achieve full circumferential contact.\u003c\/p\u003e\n\u003cp\u003e► High-Volume Adhesive Liner for Deep Void Filling\u003cbr\u003eThe thicker inner adhesive layer provides substantially more melt volume than standard 3:1 tubing, ensuring complete encapsulation of uneven surfaces, braided shields, and multi-conductor gaps. The adhesive flows under strong shrink pressure to create a 360° hermetic seal with IP67-equivalent moisture protection.\u003c\/p\u003e\n\u003cp\u003e► Heavy-Wall Construction for Superior Mechanical Protection\u003cbr\u003eThe thicker polyolefin outer wall delivers enhanced abrasion resistance, crush resistance, and impact protection — critical for wiring harnesses in heavy equipment, mining, off-road vehicles, and industrial environments where physical damage is a primary concern.\u003c\/p\u003e\n\u003cp\u003e► Robust Strain Relief \u0026amp; Vibration Resistance\u003cbr\u003eThe combined effect of high shrink force and deep adhesive penetration creates an exceptionally strong mechanical bond between the tubing and cable. This dramatically improves pull-out strength and flex fatigue performance, making it the preferred choice for high-vibration applications.\u003c\/p\u003e\n\u003cp\u003e► Flame-Retardant Outer Layer\u003cbr\u003eThe polyolefin outer wall is formulated with flame-retardant additives and meets UL 224 VW-1 vertical burn requirements, ensuring compliance with NEC and international electrical safety standards for enclosed and industrial installations. Note: The inner adhesive layer is non-flame-retardant and contributes to sealing performance only.\u003c\/p\u003e\n\u003cp\u003e► Long-Term Thermal \u0026amp; UV Stability\u003cbr\u003eThe cross-linked molecular structure of the outer wall provides excellent resistance to thermal aging, UV degradation, and thermal cycling — maintaining dielectric and mechanical integrity throughout the product's service life across the full -55°C to +125°C operating range.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🚜 Heavy Equipment \u0026amp; Off-Road Vehicles\u003cbr\u003e• Construction and mining equipment wiring harnesses\u003cbr\u003e• Agricultural machinery cable splices and repairs\u003cbr\u003e• Large-diameter battery cable terminal insulation\u003cbr\u003e• Multi-cable bundle transitions\u003c\/p\u003e\n\u003cp\u003e⚓ Marine \u0026amp; Shipboard Wiring\u003cbr\u003e• Multi-conductor navigation and communication cable sealing\u003cbr\u003e• Shipboard harness transitions through bulkheads\u003cbr\u003e• Saltwater-immersed sensor and transducer connections\u003cbr\u003e• Deck equipment and winch electrical junctions\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial \u0026amp; Power Distribution\u003cbr\u003e• Motor lead and transformer cable terminations\u003cbr\u003e• Multi-wire control panel transition splices\u003cbr\u003e• Medium-voltage cable joint insulation and sealing\u003cbr\u003e• Conveyor system cable repairs\u003c\/p\u003e\n\u003cp\u003e🚋 Rail \u0026amp; Mass Transit\u003cbr\u003e• Rolling stock wiring harness transitions\u003cbr\u003e• Multi-conductor signal and control cable sealing\u003cbr\u003e• Underground and outdoor rail infrastructure connections\u003c\/p\u003e\n\u003cp\u003e☀️ Renewable Energy — Utility Scale\u003cbr\u003e• Solar farm combiner box cable transitions\u003cbr\u003e• Wind turbine tower cable bundle sealing\u003cbr\u003e• Inverter and transformer cable terminations\u003c\/p\u003e\n\u003cp\u003e📡 Broadband \u0026amp; Telecom Infrastructure\u003cbr\u003e• Multi-fiber and copper cable bundle sealing\u003cbr\u003e• Cell tower feeder cable transitions\u003cbr\u003e• Underground utility vault cable splices\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (minimum 350°C output, recommended 400–500°C for thick walls), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut tubing to length using a sharp blade or tubing cutter. Due to the 4:1 ratio, allow a minimum overlap of 20–30 mm on each side of the splice or connector to ensure adequate seal length. Deburr cut edges to prevent tearing during recovery.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the cable and position it centrally over the splice, joint, or termination point before making the electrical connection. For large connectors, ensure the tubing can slide over the widest point before shrinking.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat uniformly using a high-output heat gun set to 350–450°C. Begin heating from the center of the tubing and work progressively outward toward each end. The thicker wall requires longer heat exposure — maintain heat until the tubing has fully conformed and adhesive is visible at both ends. Keep the heat source moving to avoid localized overheating.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until a generous, continuous bead of adhesive extrudes from both ends of the tubing, confirming complete adhesive flow and a circumferential seal. The tubing should conform smoothly to the underlying profile with no bridging across gaps or irregular surfaces.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling \u0026amp; Inspection\u003cbr\u003eAllow the assembly to cool naturally (do not apply water or forced cooling as this may create voids). Inspect for full recovery, uniform adhesive coverage, and absence of voids or air bubbles. A properly installed joint will be rigid at the adhesive bond line with no movement under lateral stress.\u003c\/p\u003e\n\u003cp\u003eNote: Use of open-flame torches is not recommended for precision installations as localized overheating can degrade the adhesive and polyolefin material, compromising seal integrity. For thick-wall 4:1 tubing, a variable-temperature heat gun with a reflector nozzle is strongly recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot undergoes dimensional verification, shrink ratio testing, and dielectric breakdown testing\u003cbr\u003e• Material traceability available upon request for qualified industrial customers\u003cbr\u003e• Custom lengths, colors, and printed marking available for volume orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 25m \/ 50m continuous lengths on plastic spools\u003cbr\u003e• Cut Pieces: Pre-cut segments in assorted lengths (customizable)\u003cbr\u003e• Kit Assortments: Multi-diameter organizer kits for service technicians\u003cbr\u003e• Private Label: Custom branding and packaging available for OEM and resale partners\u003cbr\u003e\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"φ4.0 \/ Red","offer_id":46269102457066,"sku":null,"price":2.6,"currency_code":"USD","in_stock":true},{"title":"φ4.0 \/ Yellow","offer_id":46269102489834,"sku":null,"price":2.6,"currency_code":"USD","in_stock":true},{"title":"φ4.0 \/ Black","offer_id":46269102522602,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"φ6.0 \/ Red","offer_id":46269102555370,"sku":null,"price":3.38,"currency_code":"USD","in_stock":true},{"title":"φ6.0 \/ Yellow","offer_id":46269102588138,"sku":null,"price":3.38,"currency_code":"USD","in_stock":true},{"title":"φ6.0 \/ Black","offer_id":46269102620906,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"φ8.0 \/ Red","offer_id":46269102653674,"sku":null,"price":4.68,"currency_code":"USD","in_stock":true},{"title":"φ8.0 \/ Yellow","offer_id":46269102686442,"sku":null,"price":4.68,"currency_code":"USD","in_stock":true},{"title":"φ8.0 \/ Black","offer_id":46269102719210,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/1784185182212_cc61b278-730f-4abd-9fe9-3af7336f2a9c.jpg?v=1789099957"},{"product_id":"2-1-halogen-free-heat-shrink-tubing-eco-friendly-flame-retardant-polyolefin-heatshrink-tube-for-electrical-wire-insulation-cable-identification","title":"2:1 Halogen-Free Heat Shrink Tubing | Eco-Friendly Flame Retardant Polyolefin Heatshrink Tube for Electrical Wire Insulation \u0026 Cable Identification","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur 2:1 ratio single-wall halogen-free heat shrink tubing is a versatile, environmentally responsible solution for general-purpose electrical insulation, wire identification, and mechanical protection. Manufactured from cross-linked polyolefin formulated without halogens, this tubing delivers reliable flame retardancy with low smoke emission and zero toxic halogen gas release when exposed to fire — making it the preferred choice for green building, mass transit, electronics, and applications requiring compliance with strict environmental and fire safety standards.\u003c\/p\u003e\n\u003cp\u003eWith a standard 2-to-1 shrink ratio, this tubing recovers to half its original diameter when heated, providing a snug, uniform fit over wires, connectors, and small components. The single-wall construction offers excellent dielectric strength, abrasion resistance, and color fastness, ideal for cable harnessing, color coding, strain relief, and general electrical insulation across a wide range of industries.\u003c\/p\u003e\n\u003cp\u003eThis halogen-free product fully complies with RoHS 3.0, REACH SVHC, and UL 224 VW-1 flammability standards, supporting your environmental compliance and sustainability objectives without compromising performance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Shrink Ratio: 2:1 (recovers to 1\/2 of original diameter)\u003cbr\u003e• Wall Construction: Single-wall cross-linked polyolefin (halogen-free formulation)\u003cbr\u003e• Operating Temperature Range: -55°C to +125°C (continuous)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 70°C\u003cbr\u003e• Full Recovery Temperature: 110°C\u003cbr\u003e• Dielectric Strength: ≥ 15 kV\/mm (ASTM D2671)\u003cbr\u003e• Dielectric Constant: ≤ 2.8 @ 1 MHz\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Flammability Rating: UL 224 VW-1 (vertical burn)\u003cbr\u003e• Tensile Strength: ≥ 10.4 MPa (ASTM D2671)\u003cbr\u003e• Elongation at Break: ≥ 200%\u003cbr\u003e• Water Absorption: ≤ 0.5%\u003cbr\u003e• Copper Corrosion: Passes ASTM D2671\u003cbr\u003e• Halogen Content: \u0026lt; 900 ppm per element (chlorine, bromine), total halogens \u0026lt; 1500 ppm (IEC 61249-2-21)\u003cbr\u003e• Low Smoke Emission: Compliant with low-smoke requirements for enclosed environments\u003cbr\u003e• Fluid Resistance: Resistant to common solvents, oils, and mild acids\u003cbr\u003e• Certifications: UL Recognized, RoHS 3.0, REACH SVHC Compliant, Halogen-Free per IEC 61249-2-21\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Halogen-Free \u0026amp; Environmentally Responsible\u003cbr\u003eFormulated without chlorine, bromine, or other halogenated flame retardants, this tubing produces minimal toxic fumes and corrosive gases during combustion. It meets IEC 61249-2-21 halogen-free standards (total halogens \u0026lt; 1500 ppm), supporting compliance with green building codes, mass transit regulations, and electronics industry environmental requirements.\u003c\/p\u003e\n\u003cp\u003e► Reliable 2:1 Shrink Ratio for General-Purpose Use\u003cbr\u003eThe industry-standard 2-to-1 recovery ratio is well-suited for the majority of wire insulation and cable identification applications. It installs quickly and consistently, conforming smoothly to round wires, small connectors, and cylindrical components without requiring specialized tools or techniques.\u003c\/p\u003e\n\u003cp\u003e► UL VW-1 Flame Retardant Performance\u003cbr\u003eThe halogen-free flame-retardant formulation achieves UL 224 VW-1 vertical burn certification, providing dependable self-extinguishing performance. Unlike halogenated materials, it achieves this level of fire safety without releasing toxic or corrosive byproducts.\u003c\/p\u003e\n\u003cp\u003e► Excellent Electrical Insulation\u003cbr\u003eWith a dielectric strength of 15 kV\/mm and high volume resistivity, this tubing provides reliable electrical isolation for low-voltage and signal-level applications, protecting against short circuits, arc flash, and electrostatic discharge.\u003c\/p\u003e\n\u003cp\u003e► Wide Range of Colors for Wire Coding\u003cbr\u003eAvailable in black, red, blue, yellow, green, white, and clear — enabling easy color-coding of circuits, phases, and functions in cable harnesses, control panels, and data installations.\u003c\/p\u003e\n\u003cp\u003e► Durable \u0026amp; Long-Lasting\u003cbr\u003eCross-linked molecular structure provides excellent resistance to thermal aging, UV exposure, abrasion, and common fluids. Maintains mechanical and electrical properties throughout the service life across the full -55°C to +125°C operating range.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🔌 Electronics \u0026amp; Electrical Manufacturing\u003cbr\u003e• PCB component lead insulation\u003cbr\u003e• Wire-to-wire splice insulation\u003cbr\u003e• Connector and terminal covering\u003cbr\u003e• Cable harness bundling and identification\u003c\/p\u003e\n\u003cp\u003e🚇 Mass Transit \u0026amp; Rail\u003cbr\u003e• Train and subway wiring harnesses\u003cbr\u003e• Passenger compartment electrical systems\u003cbr\u003e• Low-smoke, low-toxicity enclosed environment applications\u003c\/p\u003e\n\u003cp\u003e🏢 Building \u0026amp; Infrastructure\u003cbr\u003e• Green building electrical installations\u003cbr\u003e• Low-voltage wiring and data cabling\u003cbr\u003e• Fire alarm and security system wiring\u003cbr\u003e• Lighting fixture wire insulation\u003c\/p\u003e\n\u003cp\u003e🚗 Automotive \u0026amp; EV\u003cbr\u003e• Vehicle wiring harness insulation\u003cbr\u003e• Sensor and signal wire protection\u003cbr\u003e• Color-coded circuit identification\u003cbr\u003e• Aftermarket audio and accessory wiring\u003c\/p\u003e\n\u003cp\u003e💻 Data \u0026amp; Telecommunications\u003cbr\u003e• Network cable and patch cord strain relief\u003cbr\u003e• Fiber optic cable buffer protection\u003cbr\u003e• Data center cable management and labeling\u003c\/p\u003e\n\u003cp\u003e🎛️ Industrial Automation \u0026amp; Control\u003cbr\u003e• PLC and control panel wiring\u003cbr\u003e• Sensor and actuator cable insulation\u003cbr\u003e• Machine tool electrical harnesses\u003cbr\u003e• Color-coded phase and function identification\u003c\/p\u003e\n\u003cp\u003e🔬 Medical \u0026amp; Laboratory Equipment\u003cbr\u003e• Medical device wiring insulation\u003cbr\u003e• Laboratory instrument cable protection\u003cbr\u003e• Applications requiring low-toxicity materials\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (250–350°C output), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut tubing to the desired length using a sharp blade or tubing cutter. Allow a small overlap beyond the area requiring insulation for complete coverage.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the wire, cable, or component and position it over the target area. For splices, center the tubing over the joint.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat evenly using a heat gun set to approximately 300°C. Move the heat source gradually along the tubing from one end to the other, or start from the center and work outward. Keep the nozzle at a sufficient distance to avoid scorching or overheating.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until the tubing has fully conformed to the underlying shape with no wrinkles, bubbles, or bridging. The surface should appear smooth and uniformly shrunk.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling\u003cbr\u003eAllow the tubing to cool naturally. Once cooled, the insulation is fully set and ready for service.\u003c\/p\u003e\n\u003cp\u003eNote: Avoid using open-flame torches for electronics or precision applications, as they can cause localized overheating and damage to sensitive components.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot undergoes dimensional verification, shrink ratio testing, and dielectric breakdown testing\u003cbr\u003e• Halogen content verified per IEC 61249-2-21 standards\u003cbr\u003e• Material traceability available upon request for qualified industrial customers\u003cbr\u003e• Custom sizes, colors, and printed marking available for volume orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 100m \/ 200m \/ 400m continuous lengths on plastic spools\u003cbr\u003e• Cut Pieces: Pre-cut segments in standard or custom lengths\u003cbr\u003e• Assortment Kits: Multi-color \/ multi-diameter kits for workshops and technicians\u003cbr\u003e• Private Label: Custom branding and packaging available for OEM and resale partners\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"Black \/ Φ0.5 \/ 1.2 meters","offer_id":46270732566762,"sku":null,"price":0.69,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.5 \/ 6 meters","offer_id":46270732599530,"sku":null,"price":3.9,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.5 \/ 12 meters","offer_id":46270732632298,"sku":null,"price":7.5,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.6 \/ 1.2 meters","offer_id":46270732665066,"sku":null,"price":0.69,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.6 \/ 6 meters","offer_id":46270732697834,"sku":null,"price":3.9,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.6 \/ 12 meters","offer_id":46270732730602,"sku":null,"price":7.5,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.8 \/ 1.2 meters","offer_id":46270732763370,"sku":null,"price":0.69,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.8 \/ 6 meters","offer_id":46270732796138,"sku":null,"price":3.9,"currency_code":"USD","in_stock":true},{"title":"Black \/ Φ0.8 \/ 12 meters","offer_id":46270732828906,"sku":null,"price":7.5,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.5 \/ 1.2 meters","offer_id":46270732861674,"sku":null,"price":0.77,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.5 \/ 6 meters","offer_id":46270732894442,"sku":null,"price":4.4,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.5 \/ 12 meters","offer_id":46270732927210,"sku":null,"price":8.4,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.6 \/ 1.2 meters","offer_id":46270732959978,"sku":null,"price":0.77,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.6 \/ 6 meters","offer_id":46270732992746,"sku":null,"price":4.4,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.6 \/ 12 meters","offer_id":46270733025514,"sku":null,"price":8.4,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.8 \/ 1.2 meters","offer_id":46270733058282,"sku":null,"price":0.77,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.8 \/ 6 meters","offer_id":46270733091050,"sku":null,"price":4.4,"currency_code":"USD","in_stock":true},{"title":"Red \/ Φ0.8 \/ 12 meters","offer_id":46270733123818,"sku":null,"price":8.4,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.5 \/ 1.2 meters","offer_id":46270733156586,"sku":null,"price":0.77,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.5 \/ 6 meters","offer_id":46270733189354,"sku":null,"price":4.4,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.5 \/ 12 meters","offer_id":46270733222122,"sku":null,"price":8.4,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.6 \/ 1.2 meters","offer_id":46270733254890,"sku":null,"price":0.77,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.6 \/ 6 meters","offer_id":46270733287658,"sku":null,"price":4.4,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.6 \/ 12 meters","offer_id":46270733320426,"sku":null,"price":8.4,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.8 \/ 1.2 meters","offer_id":46270733353194,"sku":null,"price":0.77,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.8 \/ 6 meters","offer_id":46270733385962,"sku":null,"price":4.4,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Φ0.8 \/ 12 meters","offer_id":46270733418730,"sku":null,"price":8.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/2X1.jpg?v=1789114033"},{"product_id":"pi-polyimide-high-temperature-tape-260-c-heat-resistant-kapton-style-amber-tape-with-silicone-adhesive-for-smt-soldering-masking","title":"PI Polyimide High Temperature Tape | 260°C Heat Resistant Kapton-Style Amber Tape with Silicone Adhesive for SMT, Soldering \u0026 Masking","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur Polyimide (PI) high-temperature tape, commonly known as Kapton-style tape, is a premium heat-resistant masking and insulation solution engineered for the most demanding thermal environments. Constructed from a high-performance polyimide film backing coated with a pressure-sensitive silicone adhesive, this amber-colored tape delivers exceptional thermal stability, maintaining full performance at continuous temperatures up to 260°C and withstanding peak exposure up to 300°C — far exceeding the limits of polyester, paper, and vinyl tapes.\u003c\/p\u003e\n\u003cp\u003eThe silicone adhesive system provides clean, residue-free removal even after prolonged high-temperature exposure, making it ideal for surface protection during soldering, powder coating, anodizing, and other high-heat manufacturing processes. The polyimide film also offers excellent dielectric strength, chemical resistance, and mechanical toughness — serving dual roles as both a thermal mask and electrical insulator in electronics, battery, aerospace, and industrial applications.\u003c\/p\u003e\n\u003cp\u003eAvailable in multiple widths and thicknesses, this PI tape cuts cleanly, applies smoothly, and removes cleanly without leaving adhesive residue or damaging delicate surfaces. It is the industry-standard choice for PCB assembly, lithium-ion battery manufacturing, 3D printer bed adhesion, and high-temperature powder coating masking.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Backing Material: Polyimide (PI) film (amber \/ translucent golden-brown)\u003cbr\u003e• Adhesive Type: Pressure-sensitive silicone adhesive\u003cbr\u003e• Total Thickness: 0.06mm \/ 0.08mm (standard options)\u003cbr\u003e  - Film thickness: 0.025mm\u003cbr\u003e  - Adhesive thickness: 0.035mm\u003cbr\u003e• Color: Amber (translucent golden-brown)\u003cbr\u003e• Continuous Operating Temperature: -73°C to +260°C\u003cbr\u003e• Short-Term Peak Temperature: Up to 300°C (intermittent)\u003cbr\u003e• Solder Wave Resistance: 10 seconds at 280°C, no melting or adhesive transfer\u003cbr\u003e• Adhesion to Steel: ≥ 4.5 N\/25mm\u003cbr\u003e• Tensile Strength (Backing): ≥ 170 N\/mm²\u003cbr\u003e• Elongation at Break: ≥ 40%\u003cbr\u003e• Dielectric Strength: ≥ 120 kV\/mm\u003cbr\u003e• Dielectric Constant: 3.4 @ 1 kHz\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁶ Ω·cm\u003cbr\u003e• Chemical Resistance:\u003cbr\u003e  - Solvents, acids, oils: Excellent\u003cbr\u003e  - Most common chemicals: Excellent\u003cbr\u003e• UV Resistance: Good\u003cbr\u003e• Residue-Free Removal: Yes, after high-temperature exposure\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant, Halogen-Free\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Industry-Leading High-Temperature Resistance\u003cbr\u003eRated for 260°C continuous service with short-term exposure to 300°C, polyimide tape withstands multiple passes through reflow ovens, wave soldering, and powder coating curing cycles without melting, shrinking, or degrading — outperforming every other type of pressure-sensitive tape at extreme temperatures.\u003c\/p\u003e\n\u003cp\u003e► Clean, Residue-Free Silicone Adhesive\u003cbr\u003eThe premium silicone adhesive system provides reliable holding power during high-heat processes yet removes cleanly without leaving sticky residue, even after hours at elevated temperatures. No cleanup or solvent wiping required — protecting the cosmetic and functional quality of the underlying surface.\u003c\/p\u003e\n\u003cp\u003e► Excellent Electrical Insulation\u003cbr\u003eWith dielectric strength exceeding 120 kV\/mm and high volume resistivity, the polyimide film provides outstanding electrical isolation. It is widely used for insulating battery cells, transformer windings, motor coils, and high-voltage components where thermal stability and dielectric performance are both required.\u003c\/p\u003e\n\u003cp\u003e► Superior Chemical \u0026amp; Solvent Resistance\u003cbr\u003ePolyimide film is inherently resistant to most solvents, acids, oils, and cleaning agents. The tape maintains adhesion and structural integrity during chemical processing, plating, anodizing, and wet etching operations.\u003c\/p\u003e\n\u003cp\u003e► Thin Profile \u0026amp; Dimensional Stability\u003cbr\u003eThe ultra-thin polyimide backing provides excellent thermal and electrical performance with minimal added thickness. The film maintains precise dimensional stability even under extreme temperature cycling, ensuring clean, sharp masking lines with no bleed-through.\u003c\/p\u003e\n\u003cp\u003e► Conformable \u0026amp; Easy to Apply\u003cbr\u003eDespite its exceptional thermal performance, the polyimide film is flexible and conformable, wrapping smoothly around curved surfaces, sharp corners, and irregular shapes. Applies cleanly by hand or with tape dispensers and cuts cleanly without fraying or tearing.\u003c\/p\u003e\n\u003cp\u003e► Wide Low-Temperature Range\u003cbr\u003ePerforms reliably down to -73°C, making it suitable for cryogenic applications, aerospace environments, and extreme cold-storage conditions where other adhesive tapes fail.\u003c\/p\u003e\n\u003cp\u003e► Versatile Multi-Use Performance\u003cbr\u003eA single product serves as thermal mask, electrical insulator, surface protector, and hold-down tape — reducing inventory complexity across electronics manufacturing, battery assembly, finishing, and repair operations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🔌 Electronics Manufacturing \u0026amp; PCB Assembly\u003cbr\u003e• Wave soldering and reflow soldering component masking\u003cbr\u003e• Gold finger edge connector protection during soldering\u003cbr\u003e• PCB surface protection during assembly processes\u003cbr\u003e• SMT pick-and-place carrier tape\u003cbr\u003e• Flexible circuit (FPC) reinforcement and insulation\u003c\/p\u003e\n\u003cp\u003e🔋 Battery \u0026amp; Energy Storage\u003cbr\u003e• Lithium-ion battery cell tab insulation\u003cbr\u003e• Battery module internal wrapping and isolation\u003cbr\u003e• Cylindrical battery outer layer insulation\u003cbr\u003e• EV battery pack component masking and protection\u003cbr\u003e• Energy storage system electrical insulation\u003c\/p\u003e\n\u003cp\u003e🎨 Powder Coating \u0026amp; Finishing\u003cbr\u003e• High-temperature powder coating masking\u003cbr\u003e• E-coating and anodizing masking\u003cbr\u003e• Ceramic coating process protection\u003cbr\u003e• Plating and electroplating mask\u003c\/p\u003e\n\u003cp\u003e🖨️ 3D Printing\u003cbr\u003e• Build plate \/ print bed adhesion surface\u003cbr\u003e• Heated bed thermal protection\u003cbr\u003e• PEI sheet replacement for print adhesion\u003c\/p\u003e\n\u003cp\u003e✈️ Aerospace \u0026amp; Defense\u003cbr\u003e• Aircraft wiring harness insulation\u003cbr\u003e• Avionics component thermal masking\u003cbr\u003e• Satellite and spacecraft component protection\u003cbr\u003e• Military equipment high-temperature insulation\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial \u0026amp; Motor Manufacturing\u003cbr\u003e• Motor and transformer coil wrapping\u003cbr\u003e• High-temperature sensor lead insulation\u003cbr\u003e• Furnace and oven equipment component protection\u003cbr\u003e• Composite material curing process masking\u003c\/p\u003e\n\u003cp\u003e🔬 Laboratory \u0026amp; Research\u003cbr\u003e• High-temperature experiment sample masking\u003cbr\u003e• Vacuum chamber component protection\u003cbr\u003e• Thermal testing and calibration applications\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION \u0026amp; APPLICATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eStep 1 — Surface Preparation\u003cbr\u003eEnsure the application surface is clean, dry, and free of oil, grease, dust, and contaminants. For best adhesion, wipe the surface with isopropyl alcohol and allow to dry completely before application.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Cutting\u003cbr\u003eCut the PI tape to the required size and shape using a sharp blade, scissors, or tape dispenser. For complex shapes, use a die cutter or plotter for precision patterns.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Application\u003cbr\u003ePeel the release liner and apply the tape to the target surface. Press firmly from the center outward to ensure full contact and eliminate air bubbles. For curved surfaces and edges, work the tape down gradually to avoid stretching or wrinkling.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Burnishing\u003cbr\u003eUse a squeegee, finger pressure, or roller to ensure uniform contact, especially along edges and corners. Proper adhesion is critical for preventing fluid or solder bleed-under during processing.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Processing\u003cbr\u003eProceed with the high-temperature process (soldering, curing, coating, etc.) per standard operating parameters. PI tape is designed to withstand typical process temperatures without degradation.\u003c\/p\u003e\n\u003cp\u003eStep 6 — Removal\u003cbr\u003eAfter processing and while the part is still warm (recommended), peel the tape from the surface at a slow, consistent angle. The silicone adhesive should release cleanly with no residue. For parts that have cooled fully, gentle heating with a heat gun can soften the adhesive slightly for easier removal.\u003c\/p\u003e\n\u003cp\u003eNote: Avoid stretching the tape during application, as tension may cause the tape to lift or shift during thermal cycling. Apply with zero or minimal tension for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSIZE OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Standard Widths: 3mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm, 100mm\u003cbr\u003e• Standard Lengths: 33m \/ 100ft rolls, 66m rolls, custom lengths available\u003cbr\u003e• Standard Thickness: 0.06mm (25μm film + 35μm adhesive), 0.08mm available\u003cbr\u003e• Custom die-cut shapes available for volume orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for temperature resistance, adhesion, and dielectric performance\u003cbr\u003e• Material traceability and certificates of analysis available upon request\u003cbr\u003e• Custom widths, lengths, and die-cut shapes available for volume orders\u003cbr\u003e• Full TDS and MSDS documentation available for qualified customers\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Standard Rolls: 33m \/ 100ft per roll, individually packaged\u003cbr\u003e• Bulk Rolls: 66m \/ 100m industrial rolls\u003cbr\u003e• Multi-Pack Kits: Assorted width multi-roll packs for workshops\u003cbr\u003e• Private Label: Custom branded packaging available for industrial distributors and OEM partners\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"5","offer_id":46271302729962,"sku":null,"price":2.97,"currency_code":"USD","in_stock":true},{"title":"10","offer_id":46271302762730,"sku":null,"price":5.94,"currency_code":"USD","in_stock":true},{"title":"15","offer_id":46271302795498,"sku":null,"price":8.91,"currency_code":"USD","in_stock":true},{"title":"20","offer_id":46271302828266,"sku":null,"price":11.88,"currency_code":"USD","in_stock":true},{"title":"25","offer_id":46271302861034,"sku":null,"price":14.85,"currency_code":"USD","in_stock":true},{"title":"30","offer_id":46271302893802,"sku":null,"price":17.82,"currency_code":"USD","in_stock":true},{"title":"35","offer_id":46271302926570,"sku":null,"price":20.79,"currency_code":"USD","in_stock":true},{"title":"40","offer_id":46271302959338,"sku":null,"price":23.76,"currency_code":"USD","in_stock":true},{"title":"45","offer_id":46271302992106,"sku":null,"price":26.73,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":46271303024874,"sku":null,"price":29.7,"currency_code":"USD","in_stock":true},{"title":"100","offer_id":46271303057642,"sku":null,"price":59.4,"currency_code":"USD","in_stock":true},{"title":"120","offer_id":46271303090410,"sku":null,"price":71.28,"currency_code":"USD","in_stock":true},{"title":"140","offer_id":46271303123178,"sku":null,"price":83.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/4_0b3c7688-dd85-4a4f-a680-8f2f262f7a76.jpg?v=1789114447"},{"product_id":"pvdf-heat-shrink-tubing-175-c-high-temperature-chemical-resistant-kynar-heatshrink-tube-for-semiconductor-medical-industrial-wiring","title":"PVDF Heat Shrink Tubing | 175°C High-Temperature Chemical Resistant Kynar Heatshrink Tube for Semiconductor, Medical \u0026 Industrial Wiring","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur PVDF (Polyvinylidene Fluoride) heat shrink tubing is a high-performance fluoropolymer solution engineered for applications requiring exceptional chemical resistance, high-temperature stability, and high-purity material properties. Manufactured from radiation-crosslinked PVDF resin (Kynar®-equivalent), this tubing delivers a unique combination of thermal, chemical, and mechanical performance that bridges the gap between standard polyolefin tubing and premium perfluoroalkoxy (PFA) products.\u003c\/p\u003e\n\u003cp\u003eWith a 2:1 shrink ratio, this single-wall tubing recovers uniformly at moderate temperatures while maintaining excellent dimensional stability at continuous operating temperatures up to 175°C. PVDF is inherently flame-retardant without halogenated additives, producing low smoke and minimal toxic emissions during combustion. Its high-purity formulation makes it suitable for semiconductor manufacturing, medical devices, and battery applications where contamination control is critical.\u003c\/p\u003e\n\u003cp\u003eThis PVDF heat shrink tubing fully complies with RoHS 3.0 and REACH SVHC requirements and meets UL 224 VW-1 flammability standards, making it suitable for the most demanding industrial and specialty applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Material: Radiation-crosslinked Polyvinylidene Fluoride (PVDF)\u003cbr\u003e• Shrink Ratio: 2:1 (recovers to 1\/2 of original diameter)\u003cbr\u003e• Wall Construction: Single-wall fluoropolymer\u003cbr\u003e• Operating Temperature Range: -55°C to +175°C (continuous)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 110°C\u003cbr\u003e• Full Recovery Temperature: 150°C\u003cbr\u003e• Dielectric Strength: ≥ 25 kV\/mm\u003cbr\u003e• Dielectric Constant: 7.0 – 9.0 @ 1 kHz\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Flammability Rating: UL 224 VW-1 (vertical burn) — inherently flame-retardant\u003cbr\u003e• Tensile Strength: ≥ 30 MPa\u003cbr\u003e• Elongation at Break: ≥ 100%\u003cbr\u003e• Water Absorption: \u0026lt; 0.05% (exceptionally low)\u003cbr\u003e• Chemical Resistance:\u003cbr\u003e  - Acids (concentrated): Excellent\u003cbr\u003e  - Bases: Excellent\u003cbr\u003e  - Halogenated solvents: Good to excellent\u003cbr\u003e  - Alcohols, ketones, esters: Excellent\u003cbr\u003e  - Fuels \u0026amp; oils: Excellent\u003cbr\u003e• UV \u0026amp; Weathering Resistance: Excellent (inert to UV degradation)\u003cbr\u003e• Radiation Resistance: Excellent resistance to gamma and electron beam radiation\u003cbr\u003e• Purity: Low extractable ions, suitable for high-purity environments\u003cbr\u003e• Certifications: UL Recognized, RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Outstanding Chemical Inertness\u003cbr\u003ePVDF exhibits exceptional resistance to a broad spectrum of chemicals including strong acids, bases, halogens, solvents, fuels, and oils. It maintains its mechanical and electrical properties even after prolonged immersion in aggressive chemical environments — far outperforming polyolefin and most other heat shrink materials.\u003c\/p\u003e\n\u003cp\u003e► High-Temperature Performance (175°C Continuous)\u003cbr\u003eRated for continuous operation at 175°C with short-term exposure to 200°C, PVDF tubing is suitable for high-heat industrial processes, battery systems, and equipment where standard 125°C or 150°C materials degrade prematurely.\u003c\/p\u003e\n\u003cp\u003e► Inherent Flame Retardancy — Low Smoke, Zero Halogen Additives\u003cbr\u003ePVDF is naturally self-extinguishing without the need for halogenated flame retardant additives. It achieves UL 224 VW-1 flammability while producing low smoke and minimal corrosive byproducts during combustion — a significant advantage for enclosed and occupied environments.\u003c\/p\u003e\n\u003cp\u003e► High-Purity Material Grade\u003cbr\u003eManufactured from high-purity PVDF resin with low ionic extractables and minimal outgassing, this tubing is suitable for semiconductor wafer processing, medical device components, lithium-ion battery systems, and other contamination-sensitive applications.\u003c\/p\u003e\n\u003cp\u003e► Excellent Radiation Resistance\u003cbr\u003ePVDF withstands high levels of gamma radiation and electron beam exposure without significant degradation of mechanical or electrical properties, making it the material of choice for nuclear facilities, medical sterilization processes, and aerospace radiation environments.\u003c\/p\u003e\n\u003cp\u003e► Superior UV \u0026amp; Weathering Stability\u003cbr\u003ePVDF is virtually unaffected by ultraviolet radiation and outdoor weathering. It retains its color, mechanical strength, and electrical properties after decades of outdoor exposure — ideal for solar energy, outdoor telecom, and architectural applications.\u003c\/p\u003e\n\u003cp\u003e► High Mechanical Strength \u0026amp; Abrasion Resistance\u003cbr\u003eWith a tensile strength exceeding 30 MPa — roughly three times that of standard polyolefin tubing — PVDF provides exceptional mechanical protection, cut-through resistance, and abrasion durability for wiring in harsh mechanical environments.\u003c\/p\u003e\n\u003cp\u003e► Very Low Moisture Absorption\u003cbr\u003eWater absorption below 0.05% ensures stable dielectric performance in high-humidity and submerged applications, with no dimensional change or property degradation due to moisture ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🔬 Semiconductor \u0026amp; Microelectronics\u003cbr\u003e• Wafer processing equipment wiring insulation\u003cbr\u003e• Chemical delivery system cable protection\u003cbr\u003e• High-purity gas line sensor connections\u003cbr\u003e• Cleanroom equipment wire identification\u003c\/p\u003e\n\u003cp\u003e🔋 Battery \u0026amp; Energy Storage\u003cbr\u003e• Lithium-ion battery cell tab insulation\u003cbr\u003e• Battery module wiring and busbar covering\u003cbr\u003e• BMS (Battery Management System) cable protection\u003cbr\u003e• EV battery pack internal wiring\u003c\/p\u003e\n\u003cp\u003e⚗️ Chemical Processing \u0026amp; Petrochemical\u003cbr\u003e• Corrosive environment instrumentation wiring\u003cbr\u003e• Acid and alkali-resistant cable splices\u003cbr\u003e• Chemical pump and valve actuator wiring\u003cbr\u003e• Pipeline sensor cable insulation\u003c\/p\u003e\n\u003cp\u003e🏥 Medical \u0026amp; Laboratory Equipment\u003cbr\u003e• Medical device component insulation\u003cbr\u003e• Sterilizable equipment wiring\u003cbr\u003e• Laboratory instrument cable protection\u003cbr\u003e• Dental and diagnostic device wire covering\u003c\/p\u003e\n\u003cp\u003e☢️ Nuclear \u0026amp; Radiation Environments\u003cbr\u003e• Nuclear power plant instrumentation wiring\u003cbr\u003e• Radiation therapy equipment cabling\u003cbr\u003e• Gamma sterilization process components\u003cbr\u003e• High-radiation area sensor cables\u003c\/p\u003e\n\u003cp\u003e☀️ Solar \u0026amp; Renewable Energy\u003cbr\u003e• PV inverter internal wiring insulation\u003cbr\u003e• Solar tracker cable protection\u003cbr\u003e• Concentrated solar power (CSP) high-temperature wiring\u003cbr\u003e• Outdoor combiner box connections\u003c\/p\u003e\n\u003cp\u003e✈️ Aerospace \u0026amp; Defense\u003cbr\u003e• Avionics wiring requiring radiation resistance\u003cbr\u003e• Satellite and spacecraft component insulation\u003cbr\u003e• Military equipment chemical-resistant sleeving\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial High-Temperature Processes\u003cbr\u003e• Oven and furnace sensor lead insulation\u003cbr\u003e• Plastic extrusion and molding machine wiring\u003cbr\u003e• High-temperature industrial sensor cables\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (minimum 350°C output), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut PVDF tubing to the required length using a sharp blade. PVDF is a rigid material — ensure clean, square cuts to avoid cracking or splitting during recovery.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the wire, cable, or component and position it over the target area.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat evenly using a heat gun set to approximately 350°C. Begin at one end and move gradually along the tubing length, or start from the center and work outward. PVDF has a higher recovery temperature than polyolefin — ensure sufficient heat input for complete shrinkage. Keep the heat source moving to avoid localized overheating or surface discoloration.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until the tubing has fully conformed to the underlying shape with a smooth, wrinkle-free surface. PVDF will appear slightly glossy when properly heated and recovered.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling\u003cbr\u003eAllow the tubing to cool naturally. PVDF sets quickly once heat is removed, forming a rigid, tight-fitting insulation layer.\u003c\/p\u003e\n\u003cp\u003eNote: PVDF tubing is stiffer than polyolefin after recovery and provides a more rigid, abrasion-resistant finish. For applications requiring flexibility, consider a thinner wall or specify a flexible PVDF grade.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for shrink ratio, dielectric strength, and dimensional accuracy\u003cbr\u003e• High-purity grades available with ionic contamination testing per customer requirements\u003cbr\u003e• Material traceability and certificates of analysis available upon request\u003cbr\u003e• Custom sizes, colors, and specialized formulations available for volume orders (MOQ applies)\u003cbr\u003e• Full TDS and MSDS documentation available for qualified customers\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Standard Spools: 30m \/ 60m \/ 100m continuous lengths\u003cbr\u003e• Cut Pieces: Pre-cut segments in standard or custom lengths\u003cbr\u003e• Cleanroom Packaging: Double-bagged, particle-controlled packaging for semiconductor applications\u003cbr\u003e• Private Label: Custom branding and packaging available for industrial distribution partners\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"1.2\/0.6","offer_id":46271432392938,"sku":null,"price":3.08,"currency_code":"USD","in_stock":true},{"title":"1.6\/0.8","offer_id":46271432425706,"sku":null,"price":4.58,"currency_code":"USD","in_stock":true},{"title":"2.4\/1.2","offer_id":46271432458474,"sku":null,"price":5.28,"currency_code":"USD","in_stock":true},{"title":"3.2\/1.6","offer_id":46271432491242,"sku":null,"price":6.34,"currency_code":"USD","in_stock":true},{"title":"4.8\/2.4","offer_id":46271432524010,"sku":null,"price":8.35,"currency_code":"USD","in_stock":true},{"title":"6.4\/3.2","offer_id":46271432556778,"sku":null,"price":11.88,"currency_code":"USD","in_stock":true},{"title":"7.9\/4.0","offer_id":46271432589546,"sku":null,"price":12.41,"currency_code":"USD","in_stock":true},{"title":"9.5\/4.8","offer_id":46271432622314,"sku":null,"price":14.26,"currency_code":"USD","in_stock":true},{"title":"12.7\/6.4","offer_id":46271432655082,"sku":null,"price":21.12,"currency_code":"USD","in_stock":true},{"title":"15.0\/7.5","offer_id":46271432687850,"sku":null,"price":32.64,"currency_code":"USD","in_stock":true},{"title":"19.1\/9.5","offer_id":46271432720618,"sku":null,"price":39.6,"currency_code":"USD","in_stock":true},{"title":"25.4\/12.7","offer_id":46271432753386,"sku":null,"price":62.92,"currency_code":"USD","in_stock":true},{"title":"38.1\/19.0","offer_id":46271432786154,"sku":null,"price":135.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/1784187042236.jpg?v=1789115089"},{"product_id":"pet-nylon-braided-cable-sleeve-ul-vw-1-flame-retardant-expandable-braided-wire-loom-tubing-for-cable-management-harness-protection","title":"PET Nylon Braided Cable Sleeve | UL VW-1 Flame Retardant Expandable Braided Wire Loom Tubing for Cable Management \u0026 Harness Protection","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur flame-retardant PET nylon expandable braided cable sleeve is a versatile wire management solution designed to protect, organize, and enhance the durability of cable harnesses across automotive, industrial, electronics, and home applications. Woven from high-quality polyester (PET) monofilament yarns with a precision 2-over-2 braid structure, this sleeve delivers excellent abrasion resistance, flexibility, and expandability — expanding up to 150% of its original diameter to easily slide over connectors and irregular bundles.\u003c\/p\u003e\n\u003cp\u003eFormulated with flame-retardant additives, this braided sleeve self-extinguishes rapidly after removal of the ignition source, meeting the general safety requirements of electrical and automotive applications. The open-weave construction allows for natural air circulation, preventing heat buildup around bundled cables, while the dense braid pattern provides reliable protection against chafing, friction wear, and minor impact damage.\u003c\/p\u003e\n\u003cp\u003eAvailable in a wide range of diameters and colors, this expandable braided sleeving installs quickly without tools, cuts cleanly with a hot knife or scissors, and conforms smoothly to bends, splits, and irregular cable shapes — making it the preferred choice for professional wire harness assembly and DIY cable management projects.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Material: High-tenacity polyester (PET) monofilament (nylon-grade)\u003cbr\u003e• Weave Structure: 2-over-2 braided pattern\u003cbr\u003e• Flame Retardancy: Self-extinguishing, flame-retardant grade\u003cbr\u003e• Expansion Ratio: Up to 150% of nominal diameter\u003cbr\u003e• Operating Temperature Range: -50°C to +125°C (continuous)\u003cbr\u003e• Short-Term Melting Point: ~230°C\u003cbr\u003e• Abrasion Resistance: Excellent (meets industry standard requirements)\u003cbr\u003e• Tensile Strength: High — resists tearing and fraying when properly cut\u003cbr\u003e• Dielectric Strength: Good electrical insulation for low-voltage applications\u003cbr\u003e• UV Resistance: Good for indoor and limited outdoor use\u003cbr\u003e• Chemical Resistance:\u003cbr\u003e  - Oils, greases, fuels: Good\u003cbr\u003e  - Common solvents: Good\u003cbr\u003e  - Weak acids\/bases: Good\u003cbr\u003e• Cut Method: Hot knife (recommended, prevents fraying) or sharp scissors\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant, Halogen-Free\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Self-Extinguishing Flame Retardant\u003cbr\u003eFormulated with flame-retardant additives, the PET monofilament exhibits self-extinguishing properties — the material stops burning rapidly after removal of the ignition source, supporting general electrical safety requirements for automotive, industrial, and building applications.\u003c\/p\u003e\n\u003cp\u003e► Exceptional Expandability (Up to 150%)\u003cbr\u003eThe braided construction allows the sleeve to expand significantly in diameter, easily sliding over large connectors, plugs, and irregular cable bundles without disassembly. When released, it contracts snugly around the cables for a clean, tailored fit.\u003c\/p\u003e\n\u003cp\u003e► Superior Abrasion \u0026amp; Chafing Protection\u003cbr\u003eThe dense PET braid creates a tough, durable barrier that protects cable jackets from friction wear, vibration damage, and rubbing against metal surfaces — significantly extending the service life of wiring harnesses in high-wear environments.\u003c\/p\u003e\n\u003cp\u003e► Breathable Open-Weave Design\u003cbr\u003eUnlike solid tubing, the braided structure allows natural air circulation around cables, dissipating heat and preventing thermal buildup in bundled wire assemblies — ideal for high-current and enclosed applications.\u003c\/p\u003e\n\u003cp\u003e► Lightweight \u0026amp; Highly Flexible\u003cbr\u003eWeighs a fraction of solid conduit while maintaining excellent protection. The braided sleeve bends and flexes with the cable harness, adding minimal stiffness and following complex routing paths without kinking or buckling.\u003c\/p\u003e\n\u003cp\u003e► Fast, Tool-Free Installation\u003cbr\u003eSimply slide the expanded sleeve over the cable bundle and release — it contracts automatically for a secure fit. No adhesives, fasteners, or special tools required. Cuts easily to custom lengths with a hot knife.\u003c\/p\u003e\n\u003cp\u003e► Clean, Professional Appearance\u003cbr\u003eProvides a uniform, finished look to cable harnesses and wire bundles. Available in multiple colors for circuit identification, organization, and aesthetic matching in visible installations.\u003c\/p\u003e\n\u003cp\u003e► Wide Temperature Range\u003cbr\u003ePerforms reliably from -50°C to +125°C, withstanding both cold environments and under-hood or equipment operating temperatures without becoming brittle or softening excessively.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🚗 Automotive \u0026amp; Powersports\u003cbr\u003e• Engine bay wiring harness protection\u003cbr\u003e• Motorcycle and ATV cable harnesses\u003cbr\u003e• Car audio and aftermarket wiring\u003cbr\u003e• Trailer and towing cable looms\u003cbr\u003e• Electric vehicle (EV) high-voltage cable management\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial \u0026amp; Automation\u003cbr\u003e• Machinery and robot cable harness protection\u003cbr\u003e• Control cabinet wire organization\u003cbr\u003e• Conveyor system cable abrasion protection\u003cbr\u003e• Industrial automation cable management\u003c\/p\u003e\n\u003cp\u003e💻 Electronics \u0026amp; IT\u003cbr\u003e• Computer and server cable management\u003cbr\u003e• Data center cable organization\u003cbr\u003e• Audio\/video cable bundling\u003cbr\u003e• Gaming PC and custom build cable sleeving\u003c\/p\u003e\n\u003cp\u003e🏠 Home \u0026amp; Office\u003cbr\u003e• Home theater cable organization\u003cbr\u003e• Desk and office cable management\u003cbr\u003e• Appliance power cord protection\u003cbr\u003e• DIY and maker project wire protection\u003c\/p\u003e\n\u003cp\u003e⛵ Marine \u0026amp; RV (Interior)\u003cbr\u003e• Boat and marine interior cable looms\u003cbr\u003e• RV and camper electrical cable organization\u003c\/p\u003e\n\u003cp\u003e🔌 Electrical \u0026amp; Lighting\u003cbr\u003e• LED lighting strip wire protection\u003cbr\u003e• Signage and display cable bundling\u003cbr\u003e• Low-voltage landscape wire protection\u003cbr\u003e• Stage and event cable management\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Hot knife (recommended) or sharp scissors, optional: heat shrink end caps or cable ties\u003c\/p\u003e\n\u003cp\u003eStep 1 — Measure \u0026amp; Cut\u003cbr\u003eDetermine the required length and diameter of braided sleeve. Select a nominal diameter slightly smaller than your cable bundle (the sleeve will expand to fit). Cut to length using a hot knife for a clean, fray-free seal. If using scissors, briefly melt the cut ends with a lighter to prevent fraying.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Expand \u0026amp; Slide\u003cbr\u003eGather the cable bundle together. Hold one end of the braided sleeve and compress it lengthwise to expand the diameter. Slide the expanded sleeve over the cable bundle from one end to the other. For bundles with large connectors, simply expand the sleeve further — it can stretch up to 150% of its nominal size.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Position \u0026amp; Release\u003cbr\u003eOnce the sleeve is in position, gently pull on both ends to contract the sleeve snugly around the cable bundle. The braid will automatically tighten and conform to the shape of the wires.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Secure Ends (Optional)\u003cbr\u003eFor permanent installations, secure both ends of the sleeve using heat shrink tubing, cable ties, or adhesive-lined heat shrink end caps. This prevents the sleeve from shifting or sliding along the harness during vibration or movement.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Branching (Optional)\u003cbr\u003eFor cable harnesses with branches or splits, simply spread the braid weave at the desired point and feed the branch cable through the weave. The braided structure naturally accommodates pass-throughs without cutting.\u003c\/p\u003e\n\u003cp\u003eTip: For a professional finish, use matching-color heat shrink to cap both ends of the braided sleeve.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSIZING GUIDE\u003c\/p\u003e\n\u003cp\u003e• Measure the diameter of your cable bundle at its widest point\u003cbr\u003e• Choose a braided sleeve with a nominal diameter approximately 20–30% smaller than your bundle diameter\u003cbr\u003e• The sleeve will expand to fit over connectors and contract to hug the bundle for a clean fit\u003cbr\u003e• Example: 10mm cable bundle → use 6–8mm nominal diameter braided sleeve\u003c\/p\u003e\n\u003cp\u003eAvailable diameters (nominal): 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 40mm, 50mm\u003cbr\u003eAvailable colors: Black, White, Red, Blue, Yellow, Green, Orange, Purple, Clear (subject to stock)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for flame retardancy, abrasion resistance, and dimensional consistency\u003cbr\u003e• Material traceability available upon request\u003cbr\u003e• Custom diameters, colors, and printed markings available for volume OEM orders (MOQ applies)\u003cbr\u003e• Full TDS and MSDS documentation available for qualified customers\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 50m \/ 100m \/ 200m continuous lengths on plastic spools\u003cbr\u003e• Cut Lengths: Pre-cut segments in standard or custom lengths\u003cbr\u003e• Assortment Kits: Multi-diameter \/ multi-color kits for workshops and technicians\u003cbr\u003e• Private Label: Custom branded packaging available for distributors and OEM customers\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"2.0-3.0","offer_id":46272234684650,"sku":null,"price":0.44,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":46272234717418,"sku":null,"price":0.49,"currency_code":"USD","in_stock":true},{"title":"6","offer_id":46272234750186,"sku":null,"price":0.61,"currency_code":"USD","in_stock":true},{"title":"8","offer_id":46272234782954,"sku":null,"price":0.68,"currency_code":"USD","in_stock":true},{"title":"10","offer_id":46272234815722,"sku":null,"price":0.8,"currency_code":"USD","in_stock":true},{"title":"12.0-15.0","offer_id":46272234848490,"sku":null,"price":0.85,"currency_code":"USD","in_stock":true},{"title":"12","offer_id":46272234881258,"sku":null,"price":0.97,"currency_code":"USD","in_stock":true},{"title":"17.0","offer_id":46272234914026,"sku":null,"price":1.46,"currency_code":"USD","in_stock":true},{"title":"18.0-20.0","offer_id":46272234946794,"sku":null,"price":1.46,"currency_code":"USD","in_stock":true},{"title":"25.0","offer_id":46272234979562,"sku":null,"price":1.94,"currency_code":"USD","in_stock":true},{"title":"30.0","offer_id":46272235012330,"sku":null,"price":2.43,"currency_code":"USD","in_stock":true},{"title":"35.0","offer_id":46272235045098,"sku":null,"price":3.65,"currency_code":"USD","in_stock":true},{"title":"40","offer_id":46272235077866,"sku":null,"price":4.86,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":46272235110634,"sku":null,"price":7.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/05.jpg?v=1789119884"},{"product_id":"pet-polyester-cloth-duct-tape-high-tear-resistance-waterproof-hand-tearable-automotive-wiring-harness-tape","title":"PET Polyester Cloth Duct Tape | High Tear Resistance, Waterproof, Hand Tearable, Automotive Wiring Harness Tape","description":"\u003cp\u003ePRODUCT OVERVIEW\u003cbr\u003eOur PET polyester cloth duct tape is a heavy-duty industrial tape woven from high-strength polyester (PET) fabric, coated with premium acrylic or rubber pressure-sensitive adhesive. It features ultra-high tensile strength, excellent abrasion resistance, flexible conformability, and optional waterproof\/ flame retardant formulas, suitable for automotive wiring harness wrapping, industrial bundling, pipe repair, construction fixing, stage carpet fixing and general maintenance applications.\u003c\/p\u003e\n\u003cp\u003eThis rugged cloth tape can be hand torn easily without cutting tools, while resisting tearing lengthwise. It bonds firmly to rough surfaces including metal, plastic, wood, concrete and fabric, delivering long-lasting adhesion under vibration, temperature cycling and humid environments. Automotive grade versions provide superior noise reduction, abrasion protection and thermal stability for engine bay wiring looms.\u003c\/p\u003e\n\u003cp\u003eAvailable in multiple colors, widths and thicknesses, it can be customized for die-cutting, slitting and bulk spool formats to fit automated production and hand application scenarios.\u003c\/p\u003e\n\u003cp\u003eKEY TECHNICAL SPECIFICATIONS\u003cbr\u003e• Backing Material: Woven PET polyester fabric (polyester cloth base)\u003cbr\u003e• Adhesive Type: Acrylic \/ Rubber pressure-sensitive adhesive\u003cbr\u003e• Common Thickness: 0.16mm, 0.25mm\u003cbr\u003e• Color: Black, grey, white, red, yellow, blue, green, etc.\u003cbr\u003e• Operating Temperature Range: -40°C ~ +150°C (automotive grade)\u003cbr\u003e• Core Features: Hand-tearable, high tensile strength, abrasion resistant, flexible, optional waterproof \/ flame retardant\u003cbr\u003e• Tensile Strength: High, anti-tear, strong cross-direction tearability\u003cbr\u003e• Chemical Resistance: Resists oils, greases, weak acids, solvents and general industrial chemicals\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant, Halogen-Free (select models)\u003c\/p\u003e\n\u003cp\u003ePERFORMANCE ADVANTAGES\u003cbr\u003e► Super High Tensile \u0026amp; Anti-Tear Structure\u003cbr\u003eWoven polyester fabric construction provides exceptional toughness, resists longitudinal tearing while being easily torn transversely by hand, saving construction time without scissors or blades. Ideal for vibration-prone wiring harnesses and heavy bundling jobs.\u003c\/p\u003e\n\u003cp\u003e► Excellent Abrasion \u0026amp; Noise Reduction Performance\u003cbr\u003eDense polyester weave dramatically reduces friction wear for moving wiring looms, minimizing rattling and squeaking inside vehicles, achieving noise damping effects while protecting cable jackets from chafing damage.\u003c\/p\u003e\n\u003cp\u003e► Wide Temperature \u0026amp; Weather Resistance\u003cbr\u003eStable performance from -40°C up to 150°C, resisting aging and brittleness in engine bays, seasonal temperature changes and outdoor environments. Waterproof versions resist moisture, rain and humidity for long-term outdoor use.\u003c\/p\u003e\n\u003cp\u003e► Strong Adhesion on Rough Surfaces\u003cbr\u003eForms a secure bond with uneven, textured and curved substrates, including rough metal, plastic, carpet, concrete and hoses. Does not lift or peel under repeated bending and vibration.\u003c\/p\u003e\n\u003cp\u003e► Flexible \u0026amp; Conformable\u003cbr\u003eSoft woven structure wraps tightly around curved hoses, irregular wiring looms and complex shapes, maintaining full adhesion without hardening or lifting.\u003c\/p\u003e\n\u003cp\u003e► Multiple Functional Options\u003cbr\u003eAvailable in general-purpose binding grades, automotive noise reduction grades, flame retardant grades and waterproof grades, covering daily repair, industrial wiring, automotive modification, stage events and construction masking scenarios.\u003c\/p\u003e\n\u003cp\u003eTYPICAL APPLICATIONS\u003cbr\u003e🚗 Automotive \u0026amp; Vehicle Wiring\u003cbr\u003e• Engine bay wiring harness wrapping \u0026amp; abrasion protection\u003cbr\u003e• Interior wire loom noise reduction \u0026amp; insulation\u003cbr\u003e• Chassis wiring bundling, vibration damping \u0026amp; fixing\u003cbr\u003e• EV wiring harness secondary protection\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial Maintenance \u0026amp; Bundling\u003cbr\u003e• Pipe repair, sealing, insulation \u0026amp; leak temporary fixing\u003cbr\u003e• Heavy goods bundling, pallet fixing \u0026amp; packaging reinforcement\u003cbr\u003e• Machinery cable protection \u0026amp; routing fixing\u003cbr\u003e• Floor marking, temporary fixing \u0026amp; event cable routing\u003c\/p\u003e\n\u003cp\u003e🎬 Events \u0026amp; Construction\u003cbr\u003e• Exhibition \u0026amp; stage carpet fixing, temporary cable routing\u003cbr\u003e• Renovation masking, surface protection \u0026amp; temporary fixing\u003cbr\u003e• Building pipe wrapping, duct sealing \u0026amp; weatherproofing\u003cbr\u003e• Tent, canvas \u0026amp; outdoor fabric emergency repair\u003c\/p\u003e\n\u003cp\u003e🔧 General Repair \u0026amp; DIY\u003cbr\u003e• Household hose repair, cable bundling \u0026amp; home improvement\u003cbr\u003e• RV, marine interior wiring \u0026amp; pipe protection\u003cbr\u003e• Tool grip wrapping, equipment reinforcement \u0026amp; temporary fixes\u003c\/p\u003e\n\u003cp\u003eINSTALLATION INSTRUCTIONS\u003cbr\u003eStep 1: Surface Preparation\u003cbr\u003eClean the target surface, remove dust, grease and moisture to ensure a dry, clean substrate for maximum adhesion.\u003cbr\u003eStep 2: Tear \u0026amp; Apply\u003cbr\u003eTear the tape to the required length by hand or cut with scissors. Press firmly along the entire surface, especially edges and curves, to eliminate air bubbles.\u003cbr\u003eStep 3: Conform \u0026amp; Secure\u003cbr\u003eWrap tightly around wiring, hoses or objects, apply consistent pressure for full contact. For vibration-heavy applications, overlap wrap for enhanced durability.\u003cbr\u003eStep 4: Removal\u003cbr\u003eRemove slowly at a shallow angle when required. For long-term applications, gentle heating may help clean removal.\u003c\/p\u003e\n\u003cp\u003eSIZING OPTIONS\u003cbr\u003e• Standard Widths: 9mm, 19mm, 25mm, 38mm, 48mm, 50mm, 72mm\u003cbr\u003e• Standard Lengths: 10m, 20m, 25m, 33m, 50m rolls, bulk spools available\u003cbr\u003e• Custom slitting, die-cut shapes, colors \u0026amp; printing available for bulk orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003cbr\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Batch tested for tensile strength, temperature resistance, abrasion performance and adhesion\u003cbr\u003e• Material traceability and test reports available upon request\u003cbr\u003e• Custom OEM branding, packaging and formulations available\u003cbr\u003e• TDS and MSDS documentation available for qualified customers\u003c\/p\u003e\n\u003cp\u003ePACKAGING OPTIONS\u003cbr\u003e• Standard Individual Rolls: Core-wrapped single rolls\u003cbr\u003e• Multi-Roll Packs: Assorted widths for workshop \u0026amp; DIY use\u003cbr\u003e• Bulk Industrial Spools: Continuous long-length rolls for automated machines\u003cbr\u003e• Private Label Packaging for distributors and automotive aftermarket brands\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"15","offer_id":46272323846378,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"19","offer_id":46272323879146,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"25","offer_id":46272323911914,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/43.jpg?v=1789120340"},{"product_id":"non-slip-pattern-heat-shrink-tubing-textured-grippy-heat-shrink-tube-for-tool-handles-fishing-rods-grips","title":"Non-Slip Pattern Heat Shrink Tubing | Textured Grippy Heat Shrink Tube for Tool Handles, Fishing Rods \u0026 Grips","description":"\u003cp\u003ePRODUCT OVERVIEW\u003cbr\u003eOur non-slip patterned heat shrink tubing is a textured grip sleeve designed for handle wrapping, anti-slip modification and surface protection. Made from high-quality polymer material, it features a special embossed anti-skid texture pattern on the outer surface, which increases friction significantly for a secure, comfortable grip. When heated evenly, it shrinks tightly to fit the base shape, providing shock absorption, sweat resistance, insulation, corrosion resistance and wear protection all in one product.\u003c\/p\u003e\n\u003cp\u003eWidely used for fishing rods, golf clubs, rackets, bicycle grips, screwdrivers, pliers, wrenches, walking sticks, sports equipment and daily tool handles. It effectively prevents slipping during sweaty hands, wet environments and long-time use, while protecting original handles from wear, scratches and corrosion, improving grip comfort and safety. Multiple colors and diameters are available for customization.\u003c\/p\u003e\n\u003cp\u003eKEY TECHNICAL SPECIFICATIONS\u003cbr\u003e• Material: Polyolefin composite polymer\u003cbr\u003e• Surface Feature: Embossed anti-slip textured pattern\u003cbr\u003e• Shrink Ratio: 2:1 standard\u003cbr\u003e• Full Shrink Temperature: 70°C ~ 120°C (heat gun \/ hot water heating)\u003cbr\u003e• Operating Temperature: -40°C ~ +105°C\u003cbr\u003e• Core Features: Anti-slip texture, wear-resistant, sweat-proof, insulating, shock-absorbent, waterproof\u003cbr\u003e• Color: Black, red, blue, green, yellow, multi-color options\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant, Halogen-Free\u003c\/p\u003e\n\u003cp\u003ePERFORMANCE ADVANTAGES\u003cbr\u003e► Anti-Slip Textured Surface\u003cbr\u003eSpecially molded 3D embossed pattern greatly increases surface friction, prevents slipping in sweaty, damp and wet conditions, offers steady control for tools, fishing rods and sports equipment.\u003c\/p\u003e\n\u003cp\u003e► Comfortable Shock-Absorbent Grip\u003cbr\u003eSoft flexible structure buffers vibration and impact, reduces hand fatigue during long-time use, provides a comfortable non-slip grip experience.\u003c\/p\u003e\n\u003cp\u003e► Waterproof \u0026amp; Wear Protection\u003cbr\u003eForms a tight sealed layer after heat shrinking, resisting water, sweat, oil and dirt, protecting original handles from abrasion, corrosion, scratches and aging, extending service life.\u003c\/p\u003e\n\u003cp\u003e► Electrical Insulation \u0026amp; Safety\u003cbr\u003eGood dielectric insulation, safe for hand tools and electrical handles, preventing accidental electric shock risks.\u003c\/p\u003e\n\u003cp\u003e► Easy \u0026amp; Fast Installation\u003cbr\u003eSleeve over the handle, heat evenly with a heat gun or hot water, it quickly shrinks and conforms tightly to the shape. No glue required, easy to cut and rework.\u003c\/p\u003e\n\u003cp\u003e► Durable \u0026amp; Weather Resistant\u003cbr\u003eStable in wide temperature range, resistant to UV and daily aging, suitable for indoor workshop and outdoor sports, fishing, cycling use.\u003c\/p\u003e\n\u003cp\u003eTYPICAL APPLICATIONS\u003cbr\u003e🎣 Fishing \u0026amp; Outdoor Sports\u003cbr\u003e• Fishing rod handle modification, anti-slip grip wrapping\u003cbr\u003e• Walking sticks, trekking poles, paddles, oars grips\u003cbr\u003e• Bicycle handlebars, grips, brake levers\u003cbr\u003e• Golf clubs, tennis rackets, badminton rackets, baseball bats\u003c\/p\u003e\n\u003cp\u003e🔧 Hand Tools \u0026amp; Workshop\u003cbr\u003e• Pliers, screwdrivers, wrenches, knives, cutters grips\u003cbr\u003e• Electric tool handles, soldering iron grips\u003cbr\u003e• Garden tools, scissors, clippers and repair tools\u003c\/p\u003e\n\u003cp\u003e⚙️ Daily \u0026amp; Medical Use\u003cbr\u003e• Kitchen knives, kitchen utensils, pot handles\u003cbr\u003e• Rehabilitation walking aids, crutch handles\u003cbr\u003e• Musical instrument grips, gaming controller grips\u003c\/p\u003e\n\u003cp\u003eINSTALLATION INSTRUCTIONS\u003cbr\u003eStep 1: Choose Size\u003cbr\u003eSelect the correct inner diameter to fit the handle diameter (confirm 2:1 shrink ratio). Cut the tube to required length.\u003cbr\u003eStep 2: Slide On\u003cbr\u003eSlide the non-slip heat shrink tubing over the handle and position it properly.\u003cbr\u003eStep 3: Heat Evenly\u003cbr\u003eUse a heat gun (low-medium heat) or hot water, heat uniformly from middle to both ends to avoid air bubbles, until fully shrunk and fitted tightly.\u003cbr\u003eStep 4: Cool \u0026amp; Set\u003cbr\u003eLet it cool naturally, check tightness and texture fit before use. Avoid excessive heat to prevent damage to the pattern structure.\u003c\/p\u003e\n\u003cp\u003eSIZING OPTIONS\u003cbr\u003e• Common Inner Diameter: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 35mm\u003cbr\u003e• Standard Length: 1m, 2m, 5m, 10m rolls, pre-cut lengths available\u003cbr\u003e• Custom colors, patterns and lengths available for bulk orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003cbr\u003e• RoHS \u0026amp; REACH compliant, environmentally friendly polyolefin material\u003cbr\u003e• Batch shrinkage, anti-slip friction and aging tests\u003cbr\u003e• Custom printing, colors and pattern designs available for OEM\u003cbr\u003e• Test documentation available for bulk customers\u003c\/p\u003e\n\u003cp\u003ePACKAGING OPTIONS\u003cbr\u003e• Retail pre-cut packs (multi-color\/size kits)\u003cbr\u003e• Continuous roll packaging\u003cbr\u003e• Bulk spool packaging for sports equipment factories\u003cbr\u003e• Private label packaging available\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"Cross-hatching \/ Black","offer_id":46272441123050,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Cross-hatching \/ Red","offer_id":46272441155818,"sku":null,"price":6.5,"currency_code":"USD","in_stock":true},{"title":"Cross-hatching \/ Blue","offer_id":46272441188586,"sku":null,"price":6.5,"currency_code":"USD","in_stock":true},{"title":"Fish-scale pattern \/ Black","offer_id":46272441221354,"sku":null,"price":5.6,"currency_code":"USD","in_stock":true},{"title":"Fish-scale pattern \/ Red","offer_id":46272441254122,"sku":null,"price":7.28,"currency_code":"USD","in_stock":true},{"title":"Fish-scale pattern \/ Blue","offer_id":46272441286890,"sku":null,"price":7.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/37.jpg?v=1789120844"},{"product_id":"fluoropolymer-viton-adhesive-lined-heat-shrink-tubing-high-temperature-200-c-chemical-fuel-resistant-dual-wall-heatshrink","title":"Fluoropolymer (Viton) Adhesive-Lined Heat Shrink Tubing | High-Temperature 200°C Chemical \u0026 Fuel Resistant Dual-Wall Heatshrink","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur fluoropolymer (FKM \/ Viton-style) adhesive-lined heat shrink tubing is a high-performance dual-wall solution engineered for the most demanding high-temperature, chemically aggressive environments where standard polyolefin tubing cannot survive. Featuring a fluoroelastomer outer jacket and a high-temperature hot-melt adhesive inner liner, this tubing delivers exceptional resistance to jet fuels, hydraulic fluids, lubricating oils, solvents, and broad chemical exposure — all while maintaining reliable performance at continuous operating temperatures up to 200°C.\u003c\/p\u003e\n\u003cp\u003eWith a 2:1 shrink ratio, the tubing recovers uniformly under heat while the inner adhesive melts and flows, creating a hermetic, chemically resistant seal that bonds to both the tubing and the underlying substrate. This combination makes it the material of choice for aerospace wiring, military equipment, engine compartment harnesses, and industrial applications involving fuels, oils, and extreme thermal cycling.\u003c\/p\u003e\n\u003cp\u003eImportant Note: The flammability rating applies specifically to the outer fluoropolymer wall. The inner hot-melt adhesive layer is formulated for high-temperature sealing performance and is not independently flame-certified. Verify suitability for your specific application requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Shrink Ratio: 2:1 (recovers to 1\/2 of original diameter)\u003cbr\u003e• Wall Construction: Dual-wall structure\u003cbr\u003e  - Outer Wall: Cross-linked fluoroelastomer (FKM \/ fluororubber)\u003cbr\u003e  - Inner Liner: High-temperature resistant hot-melt adhesive\u003cbr\u003e• Operating Temperature Range: -65°C to +200°C (continuous)\u003cbr\u003e• Short-Term Peak Temperature: Up to 230°C (intermittent)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 120°C\u003cbr\u003e• Full Recovery Temperature: 175°C\u003cbr\u003e• Dielectric Strength: ≥ 15 kV\/mm\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹³ Ω·cm\u003cbr\u003e• Tensile Strength: ≥ 8 MPa\u003cbr\u003e• Elongation at Break: ≥ 150%\u003cbr\u003e• Fluid Resistance (200°C \/ 70h immersion):\u003cbr\u003e  - Jet Fuel (JP-4 \/ JP-8): Volume change \u0026lt; 10%\u003cbr\u003e  - Hydraulic Fluid (Skydrol \/ MIL-H-5606): Volume change \u0026lt; 15%\u003cbr\u003e  - Engine Oil (10W-40): Volume change \u0026lt; 10%\u003cbr\u003e  - Diesel \/ Gasoline: Excellent resistance\u003cbr\u003e• Low-Temperature Flexibility: Remains flexible down to -65°C without cracking\u003cbr\u003e• Ozone \u0026amp; Weathering Resistance: Excellent\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant; meets typical aerospace material performance requirements\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Extreme High-Temperature Capability\u003cbr\u003eRated for continuous operation at 200°C with intermittent exposure to 230°C — far exceeding the 125°C limit of standard polyolefin heat shrink tubing. The fluoropolymer outer wall maintains mechanical integrity, dielectric performance, and dimensional stability even under prolonged high-heat exposure and severe thermal cycling.\u003c\/p\u003e\n\u003cp\u003e► Unmatched Chemical \u0026amp; Fluid Resistance\u003cbr\u003eThe FKM fluororubber compound provides outstanding resistance to a broad spectrum of aggressive fluids including jet fuels (JP-4, JP-8), aviation hydraulic fluids (Skydrol, MIL-H-5606), engine oils, diesel, gasoline, solvents, and many industrial chemicals. Volume swell remains well within specification limits even after extended immersion at elevated temperatures.\u003c\/p\u003e\n\u003cp\u003e► Hermetic High-Temperature Sealing\u003cbr\u003eThe dual-wall construction with high-temperature adhesive liner creates a bonded, moisture-proof seal that remains intact across the full operating temperature range. Unlike standard EVA adhesives that soften at elevated temperatures, the high-performance inner adhesive maintains bond strength and sealing integrity at 200°C continuous service.\u003c\/p\u003e\n\u003cp\u003e► Superior Ozone \u0026amp; Weathering Resistance\u003cbr\u003eFluoropolymer materials are inherently resistant to ozone, UV radiation, oxygen aging, and outdoor weathering — making this tubing ideal for long-term exterior and under-hood applications where environmental degradation is a concern.\u003c\/p\u003e\n\u003cp\u003e► Low-Temperature Flexibility\u003cbr\u003eDespite its high-temperature rating, the material remains flexible at temperatures as low as -65°C, resisting cracking and brittleness in cold environments and maintaining seal integrity through extreme temperature cycles.\u003c\/p\u003e\n\u003cp\u003e► Aerospace-Grade Durability\u003cbr\u003eEngineered to meet the rigorous demands of aerospace and military applications, this tubing withstands vibration, mechanical flexing, and fluid exposure in the most severe service environments — from engine nacelles to landing gear wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e✈️ Aerospace \u0026amp; Aviation\u003cbr\u003e• Engine compartment and nacelle wiring harnesses\u003cbr\u003e• Fuel system sensor and connector sealing\u003cbr\u003e• Hydraulic line electrical connections\u003cbr\u003e• Avionics cable splices in high-temperature zones\u003cbr\u003e• Landing gear and auxiliary power unit (APU) wiring\u003c\/p\u003e\n\u003cp\u003e🛡️ Military \u0026amp; Defense\u003cbr\u003e• Military vehicle engine bay wiring\u003cbr\u003e• Weapon system cable sealing and insulation\u003cbr\u003e• Naval shipboard fuel system connections\u003cbr\u003e• Missile and ordnance wiring protection\u003c\/p\u003e\n\u003cp\u003e🚗 Automotive Performance \u0026amp; Racing\u003cbr\u003e• High-performance race car engine bay harnesses\u003cbr\u003e• Turbocharger and exhaust sensor wiring\u003cbr\u003e• Fuel injector and fuel pump connections\u003cbr\u003e• Aftermarket high-temperature electrical upgrades\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial \u0026amp; Petrochemical\u003cbr\u003e• Refinery and chemical plant instrumentation wiring\u003cbr\u003e• High-temperature sensor and probe cable sealing\u003cbr\u003e• Furnace and oven equipment wiring\u003cbr\u003e• Oil and gas downhole connectors (temperature-rated)\u003c\/p\u003e\n\u003cp\u003e🔥 High-Temperature Manufacturing\u003cbr\u003e• Plastic injection molding machine wiring\u003cbr\u003e• Oven and kiln sensor cables\u003cbr\u003e• Foundry and metal processing equipment connections\u003c\/p\u003e\n\u003cp\u003e⚓ Marine \u0026amp; Offshore (High-Temp Zones)\u003cbr\u003e• Engine room wiring and fuel system connections\u003cbr\u003e• Exhaust gas sensor cables\u003cbr\u003e• Offshore platform high-temperature instrumentation\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: High-output heat gun (minimum 450°C output), heat-resistant gloves, utility knife or tubing cutter, optional: reflector nozzle\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut tubing to the required length using a sharp blade. Allow a minimum overlap of 20 mm on each side of the splice or connector. Note: Fluoropolymer tubing requires higher heat input for full recovery than standard polyolefin products.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the cable and position it centrally over the splice, joint, or termination point.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat using a high-output heat gun set to 450–500°C. Begin at the center and work progressively toward each end. Maintain consistent, even heat distribution. Fluoropolymer tubing requires longer heat exposure due to its higher recovery temperature (175°C). Keep the heat source moving continuously to avoid localized overheating or surface scorching.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until the tubing has fully conformed to the underlying profile and a continuous bead of adhesive extrudes from both ends, confirming complete flow and circumferential sealing. The recovered surface should be smooth with no wrinkles, bridging, or evidence of under-recovery.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling \u0026amp; Inspection\u003cbr\u003eAllow the assembly to cool naturally at room temperature. Do not quench with water or forced cooling as this may create internal stress or adhesive voids. Once cooled, inspect for full recovery, uniform adhesive coverage, and surface integrity.\u003c\/p\u003e\n\u003cp\u003eImportant: Due to the high recovery temperature of fluoropolymer tubing, ensure that adjacent components and substrates can withstand installation temperatures of up to 200°C without damage. Use heat shields when installing near temperature-sensitive parts.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot undergoes dimensional verification, shrink ratio testing, and fluid resistance validation\u003cbr\u003e• Material traceability and lot-specific test data available upon request\u003cbr\u003e• Custom sizes, colors, and specialized formulations available for volume orders (MOQ applies)\u003cbr\u003e• Full material data sheet (TDS\/MSDS) available for qualified customers\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Standard Spools: 15m \/ 30m continuous lengths\u003cbr\u003e• Cut Pieces: Pre-cut segments in standard or custom lengths\u003cbr\u003e• Custom Packaging: Labeled and packaged per customer specification for OEM \/ production use\u003cbr\u003e• Private Label: Available for industrial distribution partners with qualifying volume\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"Φ2.4\/1.2","offer_id":46273643970794,"sku":null,"price":11.05,"currency_code":"USD","in_stock":true},{"title":"Φ3.2\/1.6","offer_id":46273644003562,"sku":null,"price":13.26,"currency_code":"USD","in_stock":true},{"title":"Φ4.8\/2.4","offer_id":46273644036330,"sku":null,"price":15.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/3X4X_c142155f-67d6-48b5-9d3d-e0539917fc99.jpg?v=1789127280"},{"product_id":"yellow-green-heat-shrink-tubing-2-1-ground-wire-identification-sleeve-ul-vw-1-flame-retardant-pe-insulation-for-protective-earth-wiring","title":"Yellow-Green Heat Shrink Tubing | 2:1 Ground Wire Identification Sleeve | UL VW-1 Flame Retardant PE Insulation for Protective Earth Wiring","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur yellow-green striped heat shrink tubing is purpose-manufactured for protective earth (PE) grounding conductor identification and insulation. Featuring the internationally recognized yellow-green bi-color pattern in accordance with IEC 60446 \/ EN 60446 standards, this tubing provides instant visual identification of grounding wires in electrical panels, machinery, control cabinets, and building wiring installations.\u003c\/p\u003e\n\u003cp\u003eConstructed from cross-linked flame-retardant polyolefin with a standard 2:1 shrink ratio, this tubing installs quickly and provides reliable electrical insulation combined with permanent color-coded identification. The dual-color stripe runs continuously along the entire length, ensuring consistent ground wire recognition across every installation — eliminating the need for separate labels or markers.\u003c\/p\u003e\n\u003cp\u003eUL 224 VW-1 flame retardant and fully RoHS \/ REACH compliant, this yellow-green heat shrink tubing meets the requirements of electrical codes and safety standards worldwide, making it the standard choice for electricians, panel builders, OEM manufacturers, and maintenance technicians.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Material: Cross-linked flame-retardant polyolefin (single wall)\u003cbr\u003e• Shrink Ratio: 2:1 (recovers to 1\/2 of original diameter)\u003cbr\u003e• Color: Yellow with continuous green stripe (bi-color, full length)\u003cbr\u003e• Color Standard: IEC 60446 \/ EN 60446 compliant protective earth (PE) identification\u003cbr\u003e• Operating Temperature Range: -55°C to +125°C (continuous)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 70°C\u003cbr\u003e• Full Recovery Temperature: 110°C\u003cbr\u003e• Dielectric Strength: ≥ 15 kV\/mm (ASTM D2671)\u003cbr\u003e• Dielectric Constant: ≤ 2.8 @ 1 MHz\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Flammability Rating: UL 224 VW-1 (vertical burn)\u003cbr\u003e• Tensile Strength: ≥ 10.4 MPa (ASTM D2671)\u003cbr\u003e• Elongation at Break: ≥ 200%\u003cbr\u003e• Water Absorption: ≤ 0.5%\u003cbr\u003e• Copper Corrosion: Passes ASTM D2671\u003cbr\u003e• Color Fastness: Resistant to fading under UV and normal service conditions\u003cbr\u003e• Fluid Resistance: Resistant to common oils, solvents, and mild acids\u003cbr\u003e• Certifications: UL Recognized, RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Standardized Ground Wire Identification\u003cbr\u003eThe yellow-green striped pattern conforms to IEC 60446 \/ EN 60446 international standards for protective earth (PE) conductor color coding. Provides immediate visual recognition of grounding wires — essential for electrical safety, code compliance, and maintenance troubleshooting.\u003c\/p\u003e\n\u003cp\u003e► Reliable 2:1 Shrink Ratio\u003cbr\u003eThe industry-standard 2-to-1 recovery ratio fits the full range of standard grounding wire gauges, from small signal ground wires to heavy equipment grounding conductors. Installs quickly and uniformly with basic heat gun equipment.\u003c\/p\u003e\n\u003cp\u003e► UL VW-1 Flame Retardant\u003cbr\u003eMeets UL 224 VW-1 vertical burn flammability requirements, ensuring compliance with NEC, IEC, and local electrical codes for enclosed panel and equipment wiring.\u003c\/p\u003e\n\u003cp\u003e► Excellent Electrical Insulation\u003cbr\u003eWith dielectric strength of 15 kV\/mm and high volume resistivity, this tubing provides dependable secondary insulation for grounding conductors, protecting against accidental contact and cross-contact with energized conductors.\u003c\/p\u003e\n\u003cp\u003e► Permanent, Fade-Resistant Color\u003cbr\u003eThe bi-color pigment is compounded directly into the polyolefin material — not surface-printed — ensuring the yellow-green identification remains visible throughout the service life of the installation, even under UV exposure, temperature cycling, and mechanical abrasion.\u003c\/p\u003e\n\u003cp\u003e► Durable \u0026amp; Long-Lasting\u003cbr\u003eCross-linked molecular structure provides excellent resistance to thermal aging, abrasion, and common fluids. Maintains insulation performance and color integrity across the full -55°C to +125°C operating range.\u003c\/p\u003e\n\u003cp\u003e► Fast \u0026amp; Economical Installation\u003cbr\u003eCombines insulation and wire identification into a single step, eliminating the need for separate ground labels, tape, or markers. Reduces installation time and labor cost in panel building and equipment manufacturing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e⚡ Electrical Panels \u0026amp; Switchgear\u003cbr\u003e• Ground bus and PE conductor identification in distribution panels\u003cbr\u003e• MCC (Motor Control Center) grounding wire marking\u003cbr\u003e• Switchgear and breaker panel protective earth insulation\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial Machinery \u0026amp; OEM Equipment\u003cbr\u003e• Machine frame grounding conductor identification\u003cbr\u003e• Control cabinet PE wire insulation and marking\u003cbr\u003e• Conveyor system and robot cell grounding wiring\u003cbr\u003e• OEM equipment production-line wire harnesses\u003c\/p\u003e\n\u003cp\u003e🏢 Building \u0026amp; Construction Wiring\u003cbr\u003e• Residential and commercial electrical panel ground wires\u003cbr\u003e• Lightning protection system conductor identification\u003cbr\u003e• Building grounding and bonding installations\u003cbr\u003e• Data center and server rack grounding\u003c\/p\u003e\n\u003cp\u003e🔌 Appliance \u0026amp; Consumer Electronics\u003cbr\u003e• Appliance power cord grounding wire insulation\u003cbr\u003e• Three-prong plug internal ground wire marking\u003cbr\u003e• Power supply and adapter PE conductor identification\u003c\/p\u003e\n\u003cp\u003e🚗 Automotive \u0026amp; Heavy Equipment\u003cbr\u003e• Vehicle chassis ground wire identification\u003cbr\u003e• Equipment frame bonding and grounding cables\u003cbr\u003e• Trailer and towing harness ground conductors\u003c\/p\u003e\n\u003cp\u003e🛠️ Maintenance \u0026amp; Repair\u003cbr\u003e• Field repair and re-identification of damaged ground wire insulation\u003cbr\u003e• Panel retrofits and electrical system upgrades\u003cbr\u003e• Servicing and rework of industrial equipment grounding\u003c\/p\u003e\n\u003cp\u003e🧪 Laboratory \u0026amp; Test Equipment\u003cbr\u003e• Test bench and measurement device grounding\u003cbr\u003e• Safety earth conductor identification in lab environments\u003cbr\u003e• Calibration equipment PE wire insulation\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (250–350°C output), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eSelect the appropriate diameter tubing for the ground wire size. Cut to the required length using a sharp blade or tubing cutter. Ensure clean, square cuts for a professional finish.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the yellow-green tubing over the grounding conductor and position it over the area requiring insulation or identification. For terminal connections, position the tubing to cover the exposed conductor up to the insulation boundary.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat evenly using a heat gun set to approximately 300°C. Move the heat source gradually along the tubing from one end to the other, or start from the center and work outward. Maintain sufficient distance to avoid scorching or discoloring the yellow-green stripe pattern.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until the tubing has fully conformed to the wire with a smooth, wrinkle-free surface. The yellow-green stripe pattern should remain clearly visible and uniform along the recovered length.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling\u003cbr\u003eAllow the tubing to cool naturally. Once cooled, the insulation is fully set and the ground wire identification is permanent.\u003c\/p\u003e\n\u003cp\u003eNote: Avoid overheating, as excessive temperature may cause the color pigments to shift or the tubing surface to become dull and uneven. Keep the heat gun moving continuously during installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for shrink ratio, dielectric performance, and color consistency\u003cbr\u003e• Color pattern verified against IEC 60446 standard requirements\u003cbr\u003e• Material traceability available upon request\u003cbr\u003e• Custom diameters, lengths, and packaging available for volume OEM orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 100m \/ 200m \/ 400m continuous lengths on plastic spools\u003cbr\u003e• Pre-Cut Pieces: Standard or custom-cut segments for production use\u003cbr\u003e• Assortment Kits: Multi-diameter yellow-green tubing kits for electrical workshops\u003cbr\u003e• Private Label: Custom branded packaging available for electrical supply distributors and OEM customers\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"Φ1.0","offer_id":46273655210218,"sku":null,"price":1.27,"currency_code":"USD","in_stock":true},{"title":"Φ1.5","offer_id":46273655242986,"sku":null,"price":1.13,"currency_code":"USD","in_stock":true},{"title":"Φ2.0","offer_id":46273655275754,"sku":null,"price":1.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/1784187244268.jpg?v=1789127650"},{"product_id":"diesel-resistant-high-temperature-adhesive-heat-shrink-tubing-150-c-rated-dual-wall-fuel-oil-proof-heatshrink-for-diesel-engines","title":"Diesel-Resistant High-Temperature Adhesive Heat Shrink Tubing | 150°C Rated Dual-Wall Fuel \u0026 Oil Proof Heatshrink for Diesel Engines","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur diesel-resistant high-temperature adhesive-lined heat shrink tubing is purpose-engineered for wiring applications exposed to diesel fuel, engine oil, and elevated under-hood temperatures. Manufactured from a specially modified cross-linked polyolefin outer jacket paired with a fuel-resistant hot-melt adhesive inner liner, this dual-wall tubing delivers reliable performance at continuous operating temperatures up to 150°C — significantly higher than standard 125°C polyolefin tubing.\u003c\/p\u003e\n\u003cp\u003eWith a 3:1 shrink ratio, the tubing recovers tightly around connectors, splices, and sensor leads while the inner adhesive melts and flows to form a hermetic, diesel-resistant seal. This bonded construction prevents fuel, oil, moisture, and road contaminants from penetrating electrical connections, making it ideal for diesel trucks, heavy equipment, marine diesel engines, standby generators, and industrial diesel-powered machinery.\u003c\/p\u003e\n\u003cp\u003eImportant Note: Flammability ratings apply to the outer modified polyolefin wall. The inner adhesive liner is formulated for fuel resistance and high-temperature sealing and is not independently flame-certified.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Shrink Ratio: 3:1 (recovers to 1\/3 of original diameter)\u003cbr\u003e• Wall Construction: Dual-wall structure\u003cbr\u003e  - Outer Wall: High-temperature modified cross-linked polyolefin (diesel-resistant formulation)\u003cbr\u003e  - Inner Liner: Fuel-resistant hot-melt adhesive\u003cbr\u003e• Operating Temperature Range: -55°C to +150°C (continuous)\u003cbr\u003e• Short-Term Peak Temperature: Up to 175°C (intermittent)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 80°C\u003cbr\u003e• Full Recovery Temperature: 135°C\u003cbr\u003e• Dielectric Strength: ≥ 15 kV\/mm (ASTM D2671)\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Outer Wall Flammability: UL 224 VW-1 (vertical burn) — outer polyolefin layer only\u003cbr\u003e• Tensile Strength: ≥ 10 MPa\u003cbr\u003e• Elongation at Break: ≥ 200%\u003cbr\u003e• Diesel Fuel Resistance (100°C \/ 168h immersion):\u003cbr\u003e  - Volume change: \u0026lt; 10%\u003cbr\u003e  - Tensile retention: ≥ 70%\u003cbr\u003e  - No cracking, softening, or delamination\u003cbr\u003e• Engine Oil Resistance (125°C \/ 168h immersion):\u003cbr\u003e  - Volume change: \u0026lt; 12%\u003cbr\u003e  - Tensile retention: ≥ 70%\u003cbr\u003e• Hydraulic Fluid Resistance: Good to excellent\u003cbr\u003e• Copper Corrosion: Passes ASTM D2671\u003cbr\u003e• Certifications: UL Recognized (outer wall), RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Enhanced Diesel Fuel Resistance\u003cbr\u003eSpecially formulated polymer compound withstands prolonged contact with diesel fuel, biodiesel (B5-B20), and fuel additives without excessive swelling, softening, or degradation. Maintains seal integrity and mechanical strength even in fuel-wetted engine compartments.\u003c\/p\u003e\n\u003cp\u003e► 150°C High-Temperature Rating\u003cbr\u003eRated for 150°C continuous operation — 25°C higher than standard polyolefin heat shrink tubing — making it suitable for close-proximity engine wiring, exhaust sensor leads, and high-heat zones in diesel engine bays.\u003c\/p\u003e\n\u003cp\u003e► 3:1 Shrink Ratio for Versatile Fitting\u003cbr\u003eThe 3-to-1 recovery ratio accommodates a wide range of wire gauges and connector sizes, including molded diesel injector connectors, sensor plugs, and multi-wire splices. A single tubing size covers more applications, reducing inventory requirements.\u003c\/p\u003e\n\u003cp\u003e► Hermetic Fuel \u0026amp; Moisture Seal\u003cbr\u003eThe fuel-resistant adhesive inner liner melts and flows under shrink pressure, creating a 360° bonded seal that blocks diesel, oil, water, salt, and road grime from reaching electrical connections. Prevents corrosion and intermittent electrical failures in harsh under-hood environments.\u003c\/p\u003e\n\u003cp\u003e► Superior Mechanical \u0026amp; Abrasion Protection\u003cbr\u003eThe thick-walled construction provides robust abrasion resistance and mechanical protection against vibration, chafing, and impact — essential for heavy-duty truck, construction, and agricultural equipment wiring that experiences constant movement and wear.\u003c\/p\u003e\n\u003cp\u003e► UL VW-1 Flame Retardant Outer Wall\u003cbr\u003eThe modified polyolefin outer jacket meets UL 224 VW-1 vertical burn requirements, supporting compliance with automotive and industrial electrical safety standards.\u003c\/p\u003e\n\u003cp\u003e► Long-Term Thermal Aging Stability\u003cbr\u003eCross-linked molecular structure resists thermal oxidation and embrittlement at elevated temperatures, ensuring years of reliable service in engine compartment environments.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🚚 Heavy-Duty Diesel Trucks \u0026amp; Commercial Vehicles\u003cbr\u003e• Diesel engine wiring harness repairs\u003cbr\u003e• Fuel injector connector sealing\u003cbr\u003e• Exhaust gas temperature (EGT) sensor wiring\u003cbr\u003e• ECM and engine sensor connections\u003cbr\u003e• Battery cable and starter splices\u003c\/p\u003e\n\u003cp\u003e🚜 Construction \u0026amp; Agricultural Equipment\u003cbr\u003e• Tractor and excavator engine bay wiring\u003cbr\u003e• Diesel fuel system electrical connections\u003cbr\u003e• Heavy equipment sensor and solenoid wiring\u003cbr\u003e• Cab and chassis harness transitions\u003c\/p\u003e\n\u003cp\u003e⛵ Marine Diesel Engines\u003cbr\u003e• Boat diesel engine room wiring\u003cbr\u003e• Fuel injector and sensor cable sealing\u003cbr\u003e• Generator set electrical connections\u003cbr\u003e• Saltwater-exposed engine wiring harnesses\u003c\/p\u003e\n\u003cp\u003e⚡ Diesel Generators \u0026amp; Standby Power\u003cbr\u003e• Generator engine wiring and control harnesses\u003cbr\u003e• Fuel solenoid and sensor connections\u003cbr\u003e• Genset panel wiring splices\u003cbr\u003e• Outdoor standby generator cable sealing\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial Diesel-Powered Machinery\u003cbr\u003e• Forklift and material handling equipment wiring\u003cbr\u003e• Compressor and pump engine electrical systems\u003cbr\u003e• Mining equipment diesel engine harnesses\u003cbr\u003e• Railroad and locomotive wiring repairs\u003c\/p\u003e\n\u003cp\u003e🔧 Fleet Maintenance \u0026amp; Repair Shops\u003cbr\u003e• Universal harness repair solution for diesel-powered fleets\u003cbr\u003e• Connector pigtail replacement and sealing\u003cbr\u003e• Wire splice insulation in fuel-exposed areas\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (minimum 350°C output), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut tubing to the required length using a sharp blade or tubing cutter. Allow a minimum overlap of 15–20 mm on each side of the splice or connector to ensure adequate seal length. Deburr cut edges cleanly.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the cable and position it centrally over the splice, connector, or repair area before completing the electrical connection.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat uniformly using a heat gun set to 350–400°C. Begin heating from the center of the tubing and work progressively outward toward each end. Keep the heat source moving continuously to avoid scorching the surface or overheating the adhesive.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until the tubing has fully conformed to the underlying profile and a continuous bead of adhesive extrudes from both ends, confirming complete circumferential sealing. No wrinkles, bridging, or air bubbles should be visible.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling \u0026amp; Inspection\u003cbr\u003eAllow the assembly to cool naturally. Once cooled, verify full recovery, uniform adhesive coverage, and a tight, wrinkle-free finish. The sealed joint should show no movement when subjected to lateral force.\u003c\/p\u003e\n\u003cp\u003eNote: When installing near hot engine components, ensure the tubing is positioned to avoid direct contact with exhaust manifolds or turbocharger housings where temperatures may exceed the 150°C continuous rating.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for diesel resistance, shrink ratio, and dielectric performance\u003cbr\u003e• Material traceability and test certificates available upon request\u003cbr\u003e• Custom sizes, colors, and pre-cut lengths available for volume orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 30m \/ 50m continuous lengths on plastic spools\u003cbr\u003e• Pre-Cut Pieces: Standard or custom-length segments for production use\u003cbr\u003e• Repair Assortment Kits: Multi-diameter kits for fleet and shop maintenance\u003cbr\u003e• Private Label: Custom branding and packaging available for industrial distributors and OEM partners\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"φ3.2","offer_id":46273670545642,"sku":null,"price":2.4,"currency_code":"USD","in_stock":true},{"title":"φ4.8","offer_id":46273670578410,"sku":null,"price":3.6,"currency_code":"USD","in_stock":true},{"title":"φ6.4","offer_id":46273670611178,"sku":null,"price":4.8,"currency_code":"USD","in_stock":true},{"title":"φ9.5","offer_id":46273670643946,"sku":null,"price":10.92,"currency_code":"USD","in_stock":true},{"title":"φ12.7","offer_id":46273670676714,"sku":null,"price":14.82,"currency_code":"USD","in_stock":true},{"title":"φ19.1","offer_id":46273670709482,"sku":null,"price":25.35,"currency_code":"USD","in_stock":true},{"title":"φ25.4","offer_id":46273670742250,"sku":null,"price":48.75,"currency_code":"USD","in_stock":true},{"title":"φ38.1","offer_id":46273670775018,"sku":null,"price":75.6,"currency_code":"USD","in_stock":true},{"title":"φ50.8","offer_id":46273670807786,"sku":null,"price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/3X4X_bc5dbdac-a967-4034-9ffa-38771e9ae744.jpg?v=1789127878"},{"product_id":"automotive-fleece-fabric-tape-noise-damping-flannel-cloth-tape-abrasion-resistant-self-adhesive-wiring-harness-protection-tape","title":"Automotive Fleece Fabric Tape | Noise Damping Flannel Cloth Tape, Abrasion Resistant, Self-Adhesive Wiring Harness Protection Tape","description":"\u003cp\u003ePRODUCT OVERVIEW\u003cbr\u003eOur automotive fleece flannel tape is a soft textile flannel fabric tape with strong self-adhesive backing, specially designed for automotive wire harness wrapping, vibration damping and noise reduction. It effectively eliminates rattling, squeaking and friction noise generated by wires rubbing against car interior plastic panels, metal brackets and body parts while providing excellent abrasion protection for wiring looms.\u003c\/p\u003e\n\u003cp\u003eMade of dense soft flannel fleece fabric with flexible adhesive backing, the tape is highly conformable to curved wiring shapes, resistant to aging, temperature fluctuation and friction. It stays firmly bonded in long-term vehicle use, reduces abnormal interior noise, protects wire insulation, and improves overall vehicle driving comfort. Widely used in car door, dashboard, chassis, interior trim and engine compartment wiring harness applications.\u003c\/p\u003e\n\u003cp\u003eAvailable in standard black color and multiple widths, easy hand tear for fast wrapping and repair.\u003c\/p\u003e\n\u003cp\u003eKEY TECHNICAL SPECIFICATIONS\u003cbr\u003e• Backing Material: Soft flannel fleece fabric (polyester textile base)\u003cbr\u003e• Adhesive Type: Hot melt \/ acrylic pressure-sensitive adhesive\u003cbr\u003e• Common Thickness: 0.28mm, 0.3mm, 0.35mm\u003cbr\u003e• Color: Mainly black (custom colors available)\u003cbr\u003e• Operating Temperature Range: -40°C ~ +125°C\u003cbr\u003e• Core Features: Sound deadening, anti-rattle, anti-abrasion, flexible, conformable, hand-tearable\u003cbr\u003e• Main Function: Vibration damping, noise reduction, wire harness abrasion protection\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003ePERFORMANCE ADVANTAGES\u003cbr\u003e► Superior Sound Damping \u0026amp; Anti-Rattle Effect\u003cbr\u003eThe soft flannel fleece surface acts as a buffer layer between wiring harnesses and rigid plastic\/metal components, absorbing vibration and eliminating abnormal squeaks, rattles and friction noise inside the vehicle cabin, greatly improving driving quietness.\u003c\/p\u003e\n\u003cp\u003e► Excellent Abrasion \u0026amp; Friction Protection\u003cbr\u003eThick flannel backing reduces direct friction between wire jackets and sharp edges, plastic clips and metal frames, preventing wire damage, wear and short-circuit risks, extending wiring harness service life.\u003c\/p\u003e\n\u003cp\u003e► Good Temperature \u0026amp; Aging Resistance\u003cbr\u003eStable performance within -40°C ~ 125°C, resistant to aging, dry cracking and adhesive failure in high-temperature instrument panels and cold winter environments, suitable for year-round automotive use.\u003c\/p\u003e\n\u003cp\u003e► Flexible \u0026amp; Conformable\u003cbr\u003eSoft textile structure can wrap tightly around irregular, curved wire looms, follow complex routing shapes without hardening or lifting, ideal for narrow interior gaps and tight wiring channels.\u003c\/p\u003e\n\u003cp\u003e► Easy Hand-Tear Application\u003cbr\u003eCan be torn by hand without cutting tools, speeding up wiring harness repair, refitting and production line assembly. Strong adhesive maintains long-term adhesion without easy peeling.\u003c\/p\u003e\n\u003cp\u003e► No Residue \u0026amp; Safe for Interior Surfaces\u003cbr\u003eProper adhesive formula avoids damaging interior plastic trim, and leaves minimal residue when removed (not recommended for permanent long-term fixed delicate surfaces).\u003c\/p\u003e\n\u003cp\u003eTYPICAL APPLICATIONS\u003cbr\u003e🚗 Automotive Interior Wiring\u003cbr\u003e• Dashboard wire harness wrapping, eliminate instrument panel rattling noise\u003cbr\u003e• Car door wiring looms, reduce door panel abnormal noise\u003cbr\u003e• Floor, pillar, roof interior cable bundling \u0026amp; noise damping\u003cbr\u003e• EV interior wiring harness vibration isolation \u0026amp; protection\u003cbr\u003e• Aftermarket audio wire noise reduction wrapping\u003c\/p\u003e\n\u003cp\u003e🏭 General Industrial \u0026amp; Electrical\u003cbr\u003e• Cabin equipment wiring noise reduction \u0026amp; insulation\u003cbr\u003e• Household appliance internal wire vibration protection\u003cbr\u003e• RV, caravan interior wiring harness wrapping\u003cbr\u003e• Cable routing through plastic panels and trim\u003c\/p\u003e\n\u003cp\u003eINSTALLATION INSTRUCTIONS\u003cbr\u003eStep 1: Surface Preparation\u003cbr\u003eClean wiring harness surface to remove dust, grease and moisture, ensure dry and clean for best adhesion.\u003cbr\u003eStep 2: Tear \u0026amp; Wrap\u003cbr\u003eHand tear fleece tape to desired length, wrap tightly along the wire harness with slight overlap, ensure full contact between tape and cable surface.\u003cbr\u003eStep 3: Focus on Friction Points\u003cbr\u003eAdd extra wrapping at positions where wires contact plastic clips, sharp edges and metal brackets for key noise reduction.\u003cbr\u003eStep 4: Press Firmly\u003cbr\u003ePress the tape fully to ensure no air bubbles, preventing movement and vibration during vehicle driving.\u003c\/p\u003e\n\u003cp\u003eSIZING OPTIONS\u003cbr\u003e• Standard Widths: 9mm, 15mm, 19mm, 25mm, 30mm\u003cbr\u003e• Standard Lengths: 15m, 20m, 25m, 33m rolls\u003cbr\u003e• Custom slitting, printing and bulk spools available (MOQ applies)\u003c\/p\u003e\n\u003cp\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003cbr\u003e• RoHS \u0026amp; REACH compliant, automotive-grade material\u003cbr\u003e• Batch tested for adhesion, aging resistance and noise damping performance\u003cbr\u003e• OEM \u0026amp; private label service available for automotive aftermarket\u003cbr\u003e• Test reports available upon request\u003c\/p\u003e\n\u003cp\u003ePACKAGING OPTIONS\u003cbr\u003e• Single roll retail packaging\u003cbr\u003e• Multi-roll boxed packs\u003cbr\u003e• Bulk industrial spools for auto wiring harness factories\u003cbr\u003e• Custom printed packaging available\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"15","offer_id":46273686634730,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"19","offer_id":46273686667498,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"25","offer_id":46273686700266,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/39.jpg?v=1789128185"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/collections\/1784185182212.jpg?v=1789134126","url":"https:\/\/www.juxinson.com\/collections\/all-products.oembed","provider":"Juxinsheng InsulTech","version":"1.0","type":"link"}