{"title":"New arrivals","description":null,"products":[{"product_id":"pvdf-heat-shrink-tubing-175-c-high-temperature-chemical-resistant-kynar-heatshrink-tube-for-semiconductor-medical-industrial-wiring","title":"PVDF Heat Shrink Tubing | 175°C High-Temperature Chemical Resistant Kynar Heatshrink Tube for Semiconductor, Medical \u0026 Industrial Wiring","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur PVDF (Polyvinylidene Fluoride) heat shrink tubing is a high-performance fluoropolymer solution engineered for applications requiring exceptional chemical resistance, high-temperature stability, and high-purity material properties. Manufactured from radiation-crosslinked PVDF resin (Kynar®-equivalent), this tubing delivers a unique combination of thermal, chemical, and mechanical performance that bridges the gap between standard polyolefin tubing and premium perfluoroalkoxy (PFA) products.\u003c\/p\u003e\n\u003cp\u003eWith a 2:1 shrink ratio, this single-wall tubing recovers uniformly at moderate temperatures while maintaining excellent dimensional stability at continuous operating temperatures up to 175°C. PVDF is inherently flame-retardant without halogenated additives, producing low smoke and minimal toxic emissions during combustion. Its high-purity formulation makes it suitable for semiconductor manufacturing, medical devices, and battery applications where contamination control is critical.\u003c\/p\u003e\n\u003cp\u003eThis PVDF heat shrink tubing fully complies with RoHS 3.0 and REACH SVHC requirements and meets UL 224 VW-1 flammability standards, making it suitable for the most demanding industrial and specialty applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Material: Radiation-crosslinked Polyvinylidene Fluoride (PVDF)\u003cbr\u003e• Shrink Ratio: 2:1 (recovers to 1\/2 of original diameter)\u003cbr\u003e• Wall Construction: Single-wall fluoropolymer\u003cbr\u003e• Operating Temperature Range: -55°C to +175°C (continuous)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 110°C\u003cbr\u003e• Full Recovery Temperature: 150°C\u003cbr\u003e• Dielectric Strength: ≥ 25 kV\/mm\u003cbr\u003e• Dielectric Constant: 7.0 – 9.0 @ 1 kHz\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Flammability Rating: UL 224 VW-1 (vertical burn) — inherently flame-retardant\u003cbr\u003e• Tensile Strength: ≥ 30 MPa\u003cbr\u003e• Elongation at Break: ≥ 100%\u003cbr\u003e• Water Absorption: \u0026lt; 0.05% (exceptionally low)\u003cbr\u003e• Chemical Resistance:\u003cbr\u003e  - Acids (concentrated): Excellent\u003cbr\u003e  - Bases: Excellent\u003cbr\u003e  - Halogenated solvents: Good to excellent\u003cbr\u003e  - Alcohols, ketones, esters: Excellent\u003cbr\u003e  - Fuels \u0026amp; oils: Excellent\u003cbr\u003e• UV \u0026amp; Weathering Resistance: Excellent (inert to UV degradation)\u003cbr\u003e• Radiation Resistance: Excellent resistance to gamma and electron beam radiation\u003cbr\u003e• Purity: Low extractable ions, suitable for high-purity environments\u003cbr\u003e• Certifications: UL Recognized, RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Outstanding Chemical Inertness\u003cbr\u003ePVDF exhibits exceptional resistance to a broad spectrum of chemicals including strong acids, bases, halogens, solvents, fuels, and oils. It maintains its mechanical and electrical properties even after prolonged immersion in aggressive chemical environments — far outperforming polyolefin and most other heat shrink materials.\u003c\/p\u003e\n\u003cp\u003e► High-Temperature Performance (175°C Continuous)\u003cbr\u003eRated for continuous operation at 175°C with short-term exposure to 200°C, PVDF tubing is suitable for high-heat industrial processes, battery systems, and equipment where standard 125°C or 150°C materials degrade prematurely.\u003c\/p\u003e\n\u003cp\u003e► Inherent Flame Retardancy — Low Smoke, Zero Halogen Additives\u003cbr\u003ePVDF is naturally self-extinguishing without the need for halogenated flame retardant additives. It achieves UL 224 VW-1 flammability while producing low smoke and minimal corrosive byproducts during combustion — a significant advantage for enclosed and occupied environments.\u003c\/p\u003e\n\u003cp\u003e► High-Purity Material Grade\u003cbr\u003eManufactured from high-purity PVDF resin with low ionic extractables and minimal outgassing, this tubing is suitable for semiconductor wafer processing, medical device components, lithium-ion battery systems, and other contamination-sensitive applications.\u003c\/p\u003e\n\u003cp\u003e► Excellent Radiation Resistance\u003cbr\u003ePVDF withstands high levels of gamma radiation and electron beam exposure without significant degradation of mechanical or electrical properties, making it the material of choice for nuclear facilities, medical sterilization processes, and aerospace radiation environments.\u003c\/p\u003e\n\u003cp\u003e► Superior UV \u0026amp; Weathering Stability\u003cbr\u003ePVDF is virtually unaffected by ultraviolet radiation and outdoor weathering. It retains its color, mechanical strength, and electrical properties after decades of outdoor exposure — ideal for solar energy, outdoor telecom, and architectural applications.\u003c\/p\u003e\n\u003cp\u003e► High Mechanical Strength \u0026amp; Abrasion Resistance\u003cbr\u003eWith a tensile strength exceeding 30 MPa — roughly three times that of standard polyolefin tubing — PVDF provides exceptional mechanical protection, cut-through resistance, and abrasion durability for wiring in harsh mechanical environments.\u003c\/p\u003e\n\u003cp\u003e► Very Low Moisture Absorption\u003cbr\u003eWater absorption below 0.05% ensures stable dielectric performance in high-humidity and submerged applications, with no dimensional change or property degradation due to moisture ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🔬 Semiconductor \u0026amp; Microelectronics\u003cbr\u003e• Wafer processing equipment wiring insulation\u003cbr\u003e• Chemical delivery system cable protection\u003cbr\u003e• High-purity gas line sensor connections\u003cbr\u003e• Cleanroom equipment wire identification\u003c\/p\u003e\n\u003cp\u003e🔋 Battery \u0026amp; Energy Storage\u003cbr\u003e• Lithium-ion battery cell tab insulation\u003cbr\u003e• Battery module wiring and busbar covering\u003cbr\u003e• BMS (Battery Management System) cable protection\u003cbr\u003e• EV battery pack internal wiring\u003c\/p\u003e\n\u003cp\u003e⚗️ Chemical Processing \u0026amp; Petrochemical\u003cbr\u003e• Corrosive environment instrumentation wiring\u003cbr\u003e• Acid and alkali-resistant cable splices\u003cbr\u003e• Chemical pump and valve actuator wiring\u003cbr\u003e• Pipeline sensor cable insulation\u003c\/p\u003e\n\u003cp\u003e🏥 Medical \u0026amp; Laboratory Equipment\u003cbr\u003e• Medical device component insulation\u003cbr\u003e• Sterilizable equipment wiring\u003cbr\u003e• Laboratory instrument cable protection\u003cbr\u003e• Dental and diagnostic device wire covering\u003c\/p\u003e\n\u003cp\u003e☢️ Nuclear \u0026amp; Radiation Environments\u003cbr\u003e• Nuclear power plant instrumentation wiring\u003cbr\u003e• Radiation therapy equipment cabling\u003cbr\u003e• Gamma sterilization process components\u003cbr\u003e• High-radiation area sensor cables\u003c\/p\u003e\n\u003cp\u003e☀️ Solar \u0026amp; Renewable Energy\u003cbr\u003e• PV inverter internal wiring insulation\u003cbr\u003e• Solar tracker cable protection\u003cbr\u003e• Concentrated solar power (CSP) high-temperature wiring\u003cbr\u003e• Outdoor combiner box connections\u003c\/p\u003e\n\u003cp\u003e✈️ Aerospace \u0026amp; Defense\u003cbr\u003e• Avionics wiring requiring radiation resistance\u003cbr\u003e• Satellite and spacecraft component insulation\u003cbr\u003e• Military equipment chemical-resistant sleeving\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial High-Temperature Processes\u003cbr\u003e• Oven and furnace sensor lead insulation\u003cbr\u003e• Plastic extrusion and molding machine wiring\u003cbr\u003e• High-temperature industrial sensor cables\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (minimum 350°C output), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut PVDF tubing to the required length using a sharp blade. PVDF is a rigid material — ensure clean, square cuts to avoid cracking or splitting during recovery.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the wire, cable, or component and position it over the target area.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat evenly using a heat gun set to approximately 350°C. Begin at one end and move gradually along the tubing length, or start from the center and work outward. PVDF has a higher recovery temperature than polyolefin — ensure sufficient heat input for complete shrinkage. Keep the heat source moving to avoid localized overheating or surface discoloration.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until the tubing has fully conformed to the underlying shape with a smooth, wrinkle-free surface. PVDF will appear slightly glossy when properly heated and recovered.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling\u003cbr\u003eAllow the tubing to cool naturally. PVDF sets quickly once heat is removed, forming a rigid, tight-fitting insulation layer.\u003c\/p\u003e\n\u003cp\u003eNote: PVDF tubing is stiffer than polyolefin after recovery and provides a more rigid, abrasion-resistant finish. For applications requiring flexibility, consider a thinner wall or specify a flexible PVDF grade.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for shrink ratio, dielectric strength, and dimensional accuracy\u003cbr\u003e• High-purity grades available with ionic contamination testing per customer requirements\u003cbr\u003e• Material traceability and certificates of analysis available upon request\u003cbr\u003e• Custom sizes, colors, and specialized formulations available for volume orders (MOQ applies)\u003cbr\u003e• Full TDS and MSDS documentation available for qualified customers\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Standard Spools: 30m \/ 60m \/ 100m continuous lengths\u003cbr\u003e• Cut Pieces: Pre-cut segments in standard or custom lengths\u003cbr\u003e• Cleanroom Packaging: Double-bagged, particle-controlled packaging for semiconductor applications\u003cbr\u003e• Private Label: Custom branding and packaging available for industrial distribution partners\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"1.2\/0.6","offer_id":46271432392938,"sku":null,"price":3.08,"currency_code":"USD","in_stock":true},{"title":"1.6\/0.8","offer_id":46271432425706,"sku":null,"price":4.58,"currency_code":"USD","in_stock":true},{"title":"2.4\/1.2","offer_id":46271432458474,"sku":null,"price":5.28,"currency_code":"USD","in_stock":true},{"title":"3.2\/1.6","offer_id":46271432491242,"sku":null,"price":6.34,"currency_code":"USD","in_stock":true},{"title":"4.8\/2.4","offer_id":46271432524010,"sku":null,"price":8.35,"currency_code":"USD","in_stock":true},{"title":"6.4\/3.2","offer_id":46271432556778,"sku":null,"price":11.88,"currency_code":"USD","in_stock":true},{"title":"7.9\/4.0","offer_id":46271432589546,"sku":null,"price":12.41,"currency_code":"USD","in_stock":true},{"title":"9.5\/4.8","offer_id":46271432622314,"sku":null,"price":14.26,"currency_code":"USD","in_stock":true},{"title":"12.7\/6.4","offer_id":46271432655082,"sku":null,"price":21.12,"currency_code":"USD","in_stock":true},{"title":"15.0\/7.5","offer_id":46271432687850,"sku":null,"price":32.64,"currency_code":"USD","in_stock":true},{"title":"19.1\/9.5","offer_id":46271432720618,"sku":null,"price":39.6,"currency_code":"USD","in_stock":true},{"title":"25.4\/12.7","offer_id":46271432753386,"sku":null,"price":62.92,"currency_code":"USD","in_stock":true},{"title":"38.1\/19.0","offer_id":46271432786154,"sku":null,"price":135.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/1784187042236.jpg?v=1789115089"},{"product_id":"pet-nylon-braided-cable-sleeve-ul-vw-1-flame-retardant-expandable-braided-wire-loom-tubing-for-cable-management-harness-protection","title":"PET Nylon Braided Cable Sleeve | UL VW-1 Flame Retardant Expandable Braided Wire Loom Tubing for Cable Management \u0026 Harness Protection","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur flame-retardant PET nylon expandable braided cable sleeve is a versatile wire management solution designed to protect, organize, and enhance the durability of cable harnesses across automotive, industrial, electronics, and home applications. Woven from high-quality polyester (PET) monofilament yarns with a precision 2-over-2 braid structure, this sleeve delivers excellent abrasion resistance, flexibility, and expandability — expanding up to 150% of its original diameter to easily slide over connectors and irregular bundles.\u003c\/p\u003e\n\u003cp\u003eFormulated with flame-retardant additives, this braided sleeve self-extinguishes rapidly after removal of the ignition source, meeting the general safety requirements of electrical and automotive applications. The open-weave construction allows for natural air circulation, preventing heat buildup around bundled cables, while the dense braid pattern provides reliable protection against chafing, friction wear, and minor impact damage.\u003c\/p\u003e\n\u003cp\u003eAvailable in a wide range of diameters and colors, this expandable braided sleeving installs quickly without tools, cuts cleanly with a hot knife or scissors, and conforms smoothly to bends, splits, and irregular cable shapes — making it the preferred choice for professional wire harness assembly and DIY cable management projects.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Material: High-tenacity polyester (PET) monofilament (nylon-grade)\u003cbr\u003e• Weave Structure: 2-over-2 braided pattern\u003cbr\u003e• Flame Retardancy: Self-extinguishing, flame-retardant grade\u003cbr\u003e• Expansion Ratio: Up to 150% of nominal diameter\u003cbr\u003e• Operating Temperature Range: -50°C to +125°C (continuous)\u003cbr\u003e• Short-Term Melting Point: ~230°C\u003cbr\u003e• Abrasion Resistance: Excellent (meets industry standard requirements)\u003cbr\u003e• Tensile Strength: High — resists tearing and fraying when properly cut\u003cbr\u003e• Dielectric Strength: Good electrical insulation for low-voltage applications\u003cbr\u003e• UV Resistance: Good for indoor and limited outdoor use\u003cbr\u003e• Chemical Resistance:\u003cbr\u003e  - Oils, greases, fuels: Good\u003cbr\u003e  - Common solvents: Good\u003cbr\u003e  - Weak acids\/bases: Good\u003cbr\u003e• Cut Method: Hot knife (recommended, prevents fraying) or sharp scissors\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant, Halogen-Free\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Self-Extinguishing Flame Retardant\u003cbr\u003eFormulated with flame-retardant additives, the PET monofilament exhibits self-extinguishing properties — the material stops burning rapidly after removal of the ignition source, supporting general electrical safety requirements for automotive, industrial, and building applications.\u003c\/p\u003e\n\u003cp\u003e► Exceptional Expandability (Up to 150%)\u003cbr\u003eThe braided construction allows the sleeve to expand significantly in diameter, easily sliding over large connectors, plugs, and irregular cable bundles without disassembly. When released, it contracts snugly around the cables for a clean, tailored fit.\u003c\/p\u003e\n\u003cp\u003e► Superior Abrasion \u0026amp; Chafing Protection\u003cbr\u003eThe dense PET braid creates a tough, durable barrier that protects cable jackets from friction wear, vibration damage, and rubbing against metal surfaces — significantly extending the service life of wiring harnesses in high-wear environments.\u003c\/p\u003e\n\u003cp\u003e► Breathable Open-Weave Design\u003cbr\u003eUnlike solid tubing, the braided structure allows natural air circulation around cables, dissipating heat and preventing thermal buildup in bundled wire assemblies — ideal for high-current and enclosed applications.\u003c\/p\u003e\n\u003cp\u003e► Lightweight \u0026amp; Highly Flexible\u003cbr\u003eWeighs a fraction of solid conduit while maintaining excellent protection. The braided sleeve bends and flexes with the cable harness, adding minimal stiffness and following complex routing paths without kinking or buckling.\u003c\/p\u003e\n\u003cp\u003e► Fast, Tool-Free Installation\u003cbr\u003eSimply slide the expanded sleeve over the cable bundle and release — it contracts automatically for a secure fit. No adhesives, fasteners, or special tools required. Cuts easily to custom lengths with a hot knife.\u003c\/p\u003e\n\u003cp\u003e► Clean, Professional Appearance\u003cbr\u003eProvides a uniform, finished look to cable harnesses and wire bundles. Available in multiple colors for circuit identification, organization, and aesthetic matching in visible installations.\u003c\/p\u003e\n\u003cp\u003e► Wide Temperature Range\u003cbr\u003ePerforms reliably from -50°C to +125°C, withstanding both cold environments and under-hood or equipment operating temperatures without becoming brittle or softening excessively.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🚗 Automotive \u0026amp; Powersports\u003cbr\u003e• Engine bay wiring harness protection\u003cbr\u003e• Motorcycle and ATV cable harnesses\u003cbr\u003e• Car audio and aftermarket wiring\u003cbr\u003e• Trailer and towing cable looms\u003cbr\u003e• Electric vehicle (EV) high-voltage cable management\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial \u0026amp; Automation\u003cbr\u003e• Machinery and robot cable harness protection\u003cbr\u003e• Control cabinet wire organization\u003cbr\u003e• Conveyor system cable abrasion protection\u003cbr\u003e• Industrial automation cable management\u003c\/p\u003e\n\u003cp\u003e💻 Electronics \u0026amp; IT\u003cbr\u003e• Computer and server cable management\u003cbr\u003e• Data center cable organization\u003cbr\u003e• Audio\/video cable bundling\u003cbr\u003e• Gaming PC and custom build cable sleeving\u003c\/p\u003e\n\u003cp\u003e🏠 Home \u0026amp; Office\u003cbr\u003e• Home theater cable organization\u003cbr\u003e• Desk and office cable management\u003cbr\u003e• Appliance power cord protection\u003cbr\u003e• DIY and maker project wire protection\u003c\/p\u003e\n\u003cp\u003e⛵ Marine \u0026amp; RV (Interior)\u003cbr\u003e• Boat and marine interior cable looms\u003cbr\u003e• RV and camper electrical cable organization\u003c\/p\u003e\n\u003cp\u003e🔌 Electrical \u0026amp; Lighting\u003cbr\u003e• LED lighting strip wire protection\u003cbr\u003e• Signage and display cable bundling\u003cbr\u003e• Low-voltage landscape wire protection\u003cbr\u003e• Stage and event cable management\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Hot knife (recommended) or sharp scissors, optional: heat shrink end caps or cable ties\u003c\/p\u003e\n\u003cp\u003eStep 1 — Measure \u0026amp; Cut\u003cbr\u003eDetermine the required length and diameter of braided sleeve. Select a nominal diameter slightly smaller than your cable bundle (the sleeve will expand to fit). Cut to length using a hot knife for a clean, fray-free seal. If using scissors, briefly melt the cut ends with a lighter to prevent fraying.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Expand \u0026amp; Slide\u003cbr\u003eGather the cable bundle together. Hold one end of the braided sleeve and compress it lengthwise to expand the diameter. Slide the expanded sleeve over the cable bundle from one end to the other. For bundles with large connectors, simply expand the sleeve further — it can stretch up to 150% of its nominal size.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Position \u0026amp; Release\u003cbr\u003eOnce the sleeve is in position, gently pull on both ends to contract the sleeve snugly around the cable bundle. The braid will automatically tighten and conform to the shape of the wires.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Secure Ends (Optional)\u003cbr\u003eFor permanent installations, secure both ends of the sleeve using heat shrink tubing, cable ties, or adhesive-lined heat shrink end caps. This prevents the sleeve from shifting or sliding along the harness during vibration or movement.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Branching (Optional)\u003cbr\u003eFor cable harnesses with branches or splits, simply spread the braid weave at the desired point and feed the branch cable through the weave. The braided structure naturally accommodates pass-throughs without cutting.\u003c\/p\u003e\n\u003cp\u003eTip: For a professional finish, use matching-color heat shrink to cap both ends of the braided sleeve.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSIZING GUIDE\u003c\/p\u003e\n\u003cp\u003e• Measure the diameter of your cable bundle at its widest point\u003cbr\u003e• Choose a braided sleeve with a nominal diameter approximately 20–30% smaller than your bundle diameter\u003cbr\u003e• The sleeve will expand to fit over connectors and contract to hug the bundle for a clean fit\u003cbr\u003e• Example: 10mm cable bundle → use 6–8mm nominal diameter braided sleeve\u003c\/p\u003e\n\u003cp\u003eAvailable diameters (nominal): 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 40mm, 50mm\u003cbr\u003eAvailable colors: Black, White, Red, Blue, Yellow, Green, Orange, Purple, Clear (subject to stock)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for flame retardancy, abrasion resistance, and dimensional consistency\u003cbr\u003e• Material traceability available upon request\u003cbr\u003e• Custom diameters, colors, and printed markings available for volume OEM orders (MOQ applies)\u003cbr\u003e• Full TDS and MSDS documentation available for qualified customers\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 50m \/ 100m \/ 200m continuous lengths on plastic spools\u003cbr\u003e• Cut Lengths: Pre-cut segments in standard or custom lengths\u003cbr\u003e• Assortment Kits: Multi-diameter \/ multi-color kits for workshops and technicians\u003cbr\u003e• Private Label: Custom branded packaging available for distributors and OEM customers\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"2.0-3.0","offer_id":46272234684650,"sku":null,"price":0.44,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":46272234717418,"sku":null,"price":0.49,"currency_code":"USD","in_stock":true},{"title":"6","offer_id":46272234750186,"sku":null,"price":0.61,"currency_code":"USD","in_stock":true},{"title":"8","offer_id":46272234782954,"sku":null,"price":0.68,"currency_code":"USD","in_stock":true},{"title":"10","offer_id":46272234815722,"sku":null,"price":0.8,"currency_code":"USD","in_stock":true},{"title":"12.0-15.0","offer_id":46272234848490,"sku":null,"price":0.85,"currency_code":"USD","in_stock":true},{"title":"12","offer_id":46272234881258,"sku":null,"price":0.97,"currency_code":"USD","in_stock":true},{"title":"17.0","offer_id":46272234914026,"sku":null,"price":1.46,"currency_code":"USD","in_stock":true},{"title":"18.0-20.0","offer_id":46272234946794,"sku":null,"price":1.46,"currency_code":"USD","in_stock":true},{"title":"25.0","offer_id":46272234979562,"sku":null,"price":1.94,"currency_code":"USD","in_stock":true},{"title":"30.0","offer_id":46272235012330,"sku":null,"price":2.43,"currency_code":"USD","in_stock":true},{"title":"35.0","offer_id":46272235045098,"sku":null,"price":3.65,"currency_code":"USD","in_stock":true},{"title":"40","offer_id":46272235077866,"sku":null,"price":4.86,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":46272235110634,"sku":null,"price":7.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/05.jpg?v=1789119884"},{"product_id":"pet-polyester-cloth-duct-tape-high-tear-resistance-waterproof-hand-tearable-automotive-wiring-harness-tape","title":"PET Polyester Cloth Duct Tape | High Tear Resistance, Waterproof, Hand Tearable, Automotive Wiring Harness Tape","description":"\u003cp\u003ePRODUCT OVERVIEW\u003cbr\u003eOur PET polyester cloth duct tape is a heavy-duty industrial tape woven from high-strength polyester (PET) fabric, coated with premium acrylic or rubber pressure-sensitive adhesive. It features ultra-high tensile strength, excellent abrasion resistance, flexible conformability, and optional waterproof\/ flame retardant formulas, suitable for automotive wiring harness wrapping, industrial bundling, pipe repair, construction fixing, stage carpet fixing and general maintenance applications.\u003c\/p\u003e\n\u003cp\u003eThis rugged cloth tape can be hand torn easily without cutting tools, while resisting tearing lengthwise. It bonds firmly to rough surfaces including metal, plastic, wood, concrete and fabric, delivering long-lasting adhesion under vibration, temperature cycling and humid environments. Automotive grade versions provide superior noise reduction, abrasion protection and thermal stability for engine bay wiring looms.\u003c\/p\u003e\n\u003cp\u003eAvailable in multiple colors, widths and thicknesses, it can be customized for die-cutting, slitting and bulk spool formats to fit automated production and hand application scenarios.\u003c\/p\u003e\n\u003cp\u003eKEY TECHNICAL SPECIFICATIONS\u003cbr\u003e• Backing Material: Woven PET polyester fabric (polyester cloth base)\u003cbr\u003e• Adhesive Type: Acrylic \/ Rubber pressure-sensitive adhesive\u003cbr\u003e• Common Thickness: 0.16mm, 0.25mm\u003cbr\u003e• Color: Black, grey, white, red, yellow, blue, green, etc.\u003cbr\u003e• Operating Temperature Range: -40°C ~ +150°C (automotive grade)\u003cbr\u003e• Core Features: Hand-tearable, high tensile strength, abrasion resistant, flexible, optional waterproof \/ flame retardant\u003cbr\u003e• Tensile Strength: High, anti-tear, strong cross-direction tearability\u003cbr\u003e• Chemical Resistance: Resists oils, greases, weak acids, solvents and general industrial chemicals\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant, Halogen-Free (select models)\u003c\/p\u003e\n\u003cp\u003ePERFORMANCE ADVANTAGES\u003cbr\u003e► Super High Tensile \u0026amp; Anti-Tear Structure\u003cbr\u003eWoven polyester fabric construction provides exceptional toughness, resists longitudinal tearing while being easily torn transversely by hand, saving construction time without scissors or blades. Ideal for vibration-prone wiring harnesses and heavy bundling jobs.\u003c\/p\u003e\n\u003cp\u003e► Excellent Abrasion \u0026amp; Noise Reduction Performance\u003cbr\u003eDense polyester weave dramatically reduces friction wear for moving wiring looms, minimizing rattling and squeaking inside vehicles, achieving noise damping effects while protecting cable jackets from chafing damage.\u003c\/p\u003e\n\u003cp\u003e► Wide Temperature \u0026amp; Weather Resistance\u003cbr\u003eStable performance from -40°C up to 150°C, resisting aging and brittleness in engine bays, seasonal temperature changes and outdoor environments. Waterproof versions resist moisture, rain and humidity for long-term outdoor use.\u003c\/p\u003e\n\u003cp\u003e► Strong Adhesion on Rough Surfaces\u003cbr\u003eForms a secure bond with uneven, textured and curved substrates, including rough metal, plastic, carpet, concrete and hoses. Does not lift or peel under repeated bending and vibration.\u003c\/p\u003e\n\u003cp\u003e► Flexible \u0026amp; Conformable\u003cbr\u003eSoft woven structure wraps tightly around curved hoses, irregular wiring looms and complex shapes, maintaining full adhesion without hardening or lifting.\u003c\/p\u003e\n\u003cp\u003e► Multiple Functional Options\u003cbr\u003eAvailable in general-purpose binding grades, automotive noise reduction grades, flame retardant grades and waterproof grades, covering daily repair, industrial wiring, automotive modification, stage events and construction masking scenarios.\u003c\/p\u003e\n\u003cp\u003eTYPICAL APPLICATIONS\u003cbr\u003e🚗 Automotive \u0026amp; Vehicle Wiring\u003cbr\u003e• Engine bay wiring harness wrapping \u0026amp; abrasion protection\u003cbr\u003e• Interior wire loom noise reduction \u0026amp; insulation\u003cbr\u003e• Chassis wiring bundling, vibration damping \u0026amp; fixing\u003cbr\u003e• EV wiring harness secondary protection\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial Maintenance \u0026amp; Bundling\u003cbr\u003e• Pipe repair, sealing, insulation \u0026amp; leak temporary fixing\u003cbr\u003e• Heavy goods bundling, pallet fixing \u0026amp; packaging reinforcement\u003cbr\u003e• Machinery cable protection \u0026amp; routing fixing\u003cbr\u003e• Floor marking, temporary fixing \u0026amp; event cable routing\u003c\/p\u003e\n\u003cp\u003e🎬 Events \u0026amp; Construction\u003cbr\u003e• Exhibition \u0026amp; stage carpet fixing, temporary cable routing\u003cbr\u003e• Renovation masking, surface protection \u0026amp; temporary fixing\u003cbr\u003e• Building pipe wrapping, duct sealing \u0026amp; weatherproofing\u003cbr\u003e• Tent, canvas \u0026amp; outdoor fabric emergency repair\u003c\/p\u003e\n\u003cp\u003e🔧 General Repair \u0026amp; DIY\u003cbr\u003e• Household hose repair, cable bundling \u0026amp; home improvement\u003cbr\u003e• RV, marine interior wiring \u0026amp; pipe protection\u003cbr\u003e• Tool grip wrapping, equipment reinforcement \u0026amp; temporary fixes\u003c\/p\u003e\n\u003cp\u003eINSTALLATION INSTRUCTIONS\u003cbr\u003eStep 1: Surface Preparation\u003cbr\u003eClean the target surface, remove dust, grease and moisture to ensure a dry, clean substrate for maximum adhesion.\u003cbr\u003eStep 2: Tear \u0026amp; Apply\u003cbr\u003eTear the tape to the required length by hand or cut with scissors. Press firmly along the entire surface, especially edges and curves, to eliminate air bubbles.\u003cbr\u003eStep 3: Conform \u0026amp; Secure\u003cbr\u003eWrap tightly around wiring, hoses or objects, apply consistent pressure for full contact. For vibration-heavy applications, overlap wrap for enhanced durability.\u003cbr\u003eStep 4: Removal\u003cbr\u003eRemove slowly at a shallow angle when required. For long-term applications, gentle heating may help clean removal.\u003c\/p\u003e\n\u003cp\u003eSIZING OPTIONS\u003cbr\u003e• Standard Widths: 9mm, 19mm, 25mm, 38mm, 48mm, 50mm, 72mm\u003cbr\u003e• Standard Lengths: 10m, 20m, 25m, 33m, 50m rolls, bulk spools available\u003cbr\u003e• Custom slitting, die-cut shapes, colors \u0026amp; printing available for bulk orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003cbr\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Batch tested for tensile strength, temperature resistance, abrasion performance and adhesion\u003cbr\u003e• Material traceability and test reports available upon request\u003cbr\u003e• Custom OEM branding, packaging and formulations available\u003cbr\u003e• TDS and MSDS documentation available for qualified customers\u003c\/p\u003e\n\u003cp\u003ePACKAGING OPTIONS\u003cbr\u003e• Standard Individual Rolls: Core-wrapped single rolls\u003cbr\u003e• Multi-Roll Packs: Assorted widths for workshop \u0026amp; DIY use\u003cbr\u003e• Bulk Industrial Spools: Continuous long-length rolls for automated machines\u003cbr\u003e• Private Label Packaging for distributors and automotive aftermarket brands\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"15","offer_id":46272323846378,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"19","offer_id":46272323879146,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"25","offer_id":46272323911914,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/43.jpg?v=1789120340"},{"product_id":"non-slip-pattern-heat-shrink-tubing-textured-grippy-heat-shrink-tube-for-tool-handles-fishing-rods-grips","title":"Non-Slip Pattern Heat Shrink Tubing | Textured Grippy Heat Shrink Tube for Tool Handles, Fishing Rods \u0026 Grips","description":"\u003cp\u003ePRODUCT OVERVIEW\u003cbr\u003eOur non-slip patterned heat shrink tubing is a textured grip sleeve designed for handle wrapping, anti-slip modification and surface protection. Made from high-quality polymer material, it features a special embossed anti-skid texture pattern on the outer surface, which increases friction significantly for a secure, comfortable grip. When heated evenly, it shrinks tightly to fit the base shape, providing shock absorption, sweat resistance, insulation, corrosion resistance and wear protection all in one product.\u003c\/p\u003e\n\u003cp\u003eWidely used for fishing rods, golf clubs, rackets, bicycle grips, screwdrivers, pliers, wrenches, walking sticks, sports equipment and daily tool handles. It effectively prevents slipping during sweaty hands, wet environments and long-time use, while protecting original handles from wear, scratches and corrosion, improving grip comfort and safety. Multiple colors and diameters are available for customization.\u003c\/p\u003e\n\u003cp\u003eKEY TECHNICAL SPECIFICATIONS\u003cbr\u003e• Material: Polyolefin composite polymer\u003cbr\u003e• Surface Feature: Embossed anti-slip textured pattern\u003cbr\u003e• Shrink Ratio: 2:1 standard\u003cbr\u003e• Full Shrink Temperature: 70°C ~ 120°C (heat gun \/ hot water heating)\u003cbr\u003e• Operating Temperature: -40°C ~ +105°C\u003cbr\u003e• Core Features: Anti-slip texture, wear-resistant, sweat-proof, insulating, shock-absorbent, waterproof\u003cbr\u003e• Color: Black, red, blue, green, yellow, multi-color options\u003cbr\u003e• Certifications: RoHS 3.0, REACH SVHC Compliant, Halogen-Free\u003c\/p\u003e\n\u003cp\u003ePERFORMANCE ADVANTAGES\u003cbr\u003e► Anti-Slip Textured Surface\u003cbr\u003eSpecially molded 3D embossed pattern greatly increases surface friction, prevents slipping in sweaty, damp and wet conditions, offers steady control for tools, fishing rods and sports equipment.\u003c\/p\u003e\n\u003cp\u003e► Comfortable Shock-Absorbent Grip\u003cbr\u003eSoft flexible structure buffers vibration and impact, reduces hand fatigue during long-time use, provides a comfortable non-slip grip experience.\u003c\/p\u003e\n\u003cp\u003e► Waterproof \u0026amp; Wear Protection\u003cbr\u003eForms a tight sealed layer after heat shrinking, resisting water, sweat, oil and dirt, protecting original handles from abrasion, corrosion, scratches and aging, extending service life.\u003c\/p\u003e\n\u003cp\u003e► Electrical Insulation \u0026amp; Safety\u003cbr\u003eGood dielectric insulation, safe for hand tools and electrical handles, preventing accidental electric shock risks.\u003c\/p\u003e\n\u003cp\u003e► Easy \u0026amp; Fast Installation\u003cbr\u003eSleeve over the handle, heat evenly with a heat gun or hot water, it quickly shrinks and conforms tightly to the shape. No glue required, easy to cut and rework.\u003c\/p\u003e\n\u003cp\u003e► Durable \u0026amp; Weather Resistant\u003cbr\u003eStable in wide temperature range, resistant to UV and daily aging, suitable for indoor workshop and outdoor sports, fishing, cycling use.\u003c\/p\u003e\n\u003cp\u003eTYPICAL APPLICATIONS\u003cbr\u003e🎣 Fishing \u0026amp; Outdoor Sports\u003cbr\u003e• Fishing rod handle modification, anti-slip grip wrapping\u003cbr\u003e• Walking sticks, trekking poles, paddles, oars grips\u003cbr\u003e• Bicycle handlebars, grips, brake levers\u003cbr\u003e• Golf clubs, tennis rackets, badminton rackets, baseball bats\u003c\/p\u003e\n\u003cp\u003e🔧 Hand Tools \u0026amp; Workshop\u003cbr\u003e• Pliers, screwdrivers, wrenches, knives, cutters grips\u003cbr\u003e• Electric tool handles, soldering iron grips\u003cbr\u003e• Garden tools, scissors, clippers and repair tools\u003c\/p\u003e\n\u003cp\u003e⚙️ Daily \u0026amp; Medical Use\u003cbr\u003e• Kitchen knives, kitchen utensils, pot handles\u003cbr\u003e• Rehabilitation walking aids, crutch handles\u003cbr\u003e• Musical instrument grips, gaming controller grips\u003c\/p\u003e\n\u003cp\u003eINSTALLATION INSTRUCTIONS\u003cbr\u003eStep 1: Choose Size\u003cbr\u003eSelect the correct inner diameter to fit the handle diameter (confirm 2:1 shrink ratio). Cut the tube to required length.\u003cbr\u003eStep 2: Slide On\u003cbr\u003eSlide the non-slip heat shrink tubing over the handle and position it properly.\u003cbr\u003eStep 3: Heat Evenly\u003cbr\u003eUse a heat gun (low-medium heat) or hot water, heat uniformly from middle to both ends to avoid air bubbles, until fully shrunk and fitted tightly.\u003cbr\u003eStep 4: Cool \u0026amp; Set\u003cbr\u003eLet it cool naturally, check tightness and texture fit before use. Avoid excessive heat to prevent damage to the pattern structure.\u003c\/p\u003e\n\u003cp\u003eSIZING OPTIONS\u003cbr\u003e• Common Inner Diameter: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 35mm\u003cbr\u003e• Standard Length: 1m, 2m, 5m, 10m rolls, pre-cut lengths available\u003cbr\u003e• Custom colors, patterns and lengths available for bulk orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003cbr\u003e• RoHS \u0026amp; REACH compliant, environmentally friendly polyolefin material\u003cbr\u003e• Batch shrinkage, anti-slip friction and aging tests\u003cbr\u003e• Custom printing, colors and pattern designs available for OEM\u003cbr\u003e• Test documentation available for bulk customers\u003c\/p\u003e\n\u003cp\u003ePACKAGING OPTIONS\u003cbr\u003e• Retail pre-cut packs (multi-color\/size kits)\u003cbr\u003e• Continuous roll packaging\u003cbr\u003e• Bulk spool packaging for sports equipment factories\u003cbr\u003e• Private label packaging available\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"Cross-hatching \/ Black","offer_id":46272441123050,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Cross-hatching \/ Red","offer_id":46272441155818,"sku":null,"price":6.5,"currency_code":"USD","in_stock":true},{"title":"Cross-hatching \/ Blue","offer_id":46272441188586,"sku":null,"price":6.5,"currency_code":"USD","in_stock":true},{"title":"Fish-scale pattern \/ Black","offer_id":46272441221354,"sku":null,"price":5.6,"currency_code":"USD","in_stock":true},{"title":"Fish-scale pattern \/ Red","offer_id":46272441254122,"sku":null,"price":7.28,"currency_code":"USD","in_stock":true},{"title":"Fish-scale pattern \/ Blue","offer_id":46272441286890,"sku":null,"price":7.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/37.jpg?v=1789120844"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/collections\/37.jpg?v=1789128425","url":"https:\/\/www.juxinson.com\/collections\/new-arrivals.oembed","provider":"Juxinsheng InsulTech","version":"1.0","type":"link"}