{"product_id":"diesel-resistant-high-temperature-adhesive-heat-shrink-tubing-150-c-rated-dual-wall-fuel-oil-proof-heatshrink-for-diesel-engines","title":"Diesel-Resistant High-Temperature Adhesive Heat Shrink Tubing | 150°C Rated Dual-Wall Fuel \u0026 Oil Proof Heatshrink for Diesel Engines","description":"\u003cp\u003ePRODUCT OVERVIEW\u003c\/p\u003e\n\u003cp\u003eOur diesel-resistant high-temperature adhesive-lined heat shrink tubing is purpose-engineered for wiring applications exposed to diesel fuel, engine oil, and elevated under-hood temperatures. Manufactured from a specially modified cross-linked polyolefin outer jacket paired with a fuel-resistant hot-melt adhesive inner liner, this dual-wall tubing delivers reliable performance at continuous operating temperatures up to 150°C — significantly higher than standard 125°C polyolefin tubing.\u003c\/p\u003e\n\u003cp\u003eWith a 3:1 shrink ratio, the tubing recovers tightly around connectors, splices, and sensor leads while the inner adhesive melts and flows to form a hermetic, diesel-resistant seal. This bonded construction prevents fuel, oil, moisture, and road contaminants from penetrating electrical connections, making it ideal for diesel trucks, heavy equipment, marine diesel engines, standby generators, and industrial diesel-powered machinery.\u003c\/p\u003e\n\u003cp\u003eImportant Note: Flammability ratings apply to the outer modified polyolefin wall. The inner adhesive liner is formulated for fuel resistance and high-temperature sealing and is not independently flame-certified.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKEY TECHNICAL SPECIFICATIONS\u003c\/p\u003e\n\u003cp\u003e• Shrink Ratio: 3:1 (recovers to 1\/3 of original diameter)\u003cbr\u003e• Wall Construction: Dual-wall structure\u003cbr\u003e  - Outer Wall: High-temperature modified cross-linked polyolefin (diesel-resistant formulation)\u003cbr\u003e  - Inner Liner: Fuel-resistant hot-melt adhesive\u003cbr\u003e• Operating Temperature Range: -55°C to +150°C (continuous)\u003cbr\u003e• Short-Term Peak Temperature: Up to 175°C (intermittent)\u003cbr\u003e• Shrink Initiation Temperature: ≥ 80°C\u003cbr\u003e• Full Recovery Temperature: 135°C\u003cbr\u003e• Dielectric Strength: ≥ 15 kV\/mm (ASTM D2671)\u003cbr\u003e• Volume Resistivity: ≥ 1×10¹⁴ Ω·cm\u003cbr\u003e• Outer Wall Flammability: UL 224 VW-1 (vertical burn) — outer polyolefin layer only\u003cbr\u003e• Tensile Strength: ≥ 10 MPa\u003cbr\u003e• Elongation at Break: ≥ 200%\u003cbr\u003e• Diesel Fuel Resistance (100°C \/ 168h immersion):\u003cbr\u003e  - Volume change: \u0026lt; 10%\u003cbr\u003e  - Tensile retention: ≥ 70%\u003cbr\u003e  - No cracking, softening, or delamination\u003cbr\u003e• Engine Oil Resistance (125°C \/ 168h immersion):\u003cbr\u003e  - Volume change: \u0026lt; 12%\u003cbr\u003e  - Tensile retention: ≥ 70%\u003cbr\u003e• Hydraulic Fluid Resistance: Good to excellent\u003cbr\u003e• Copper Corrosion: Passes ASTM D2671\u003cbr\u003e• Certifications: UL Recognized (outer wall), RoHS 3.0, REACH SVHC Compliant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePERFORMANCE ADVANTAGES\u003c\/p\u003e\n\u003cp\u003e► Enhanced Diesel Fuel Resistance\u003cbr\u003eSpecially formulated polymer compound withstands prolonged contact with diesel fuel, biodiesel (B5-B20), and fuel additives without excessive swelling, softening, or degradation. Maintains seal integrity and mechanical strength even in fuel-wetted engine compartments.\u003c\/p\u003e\n\u003cp\u003e► 150°C High-Temperature Rating\u003cbr\u003eRated for 150°C continuous operation — 25°C higher than standard polyolefin heat shrink tubing — making it suitable for close-proximity engine wiring, exhaust sensor leads, and high-heat zones in diesel engine bays.\u003c\/p\u003e\n\u003cp\u003e► 3:1 Shrink Ratio for Versatile Fitting\u003cbr\u003eThe 3-to-1 recovery ratio accommodates a wide range of wire gauges and connector sizes, including molded diesel injector connectors, sensor plugs, and multi-wire splices. A single tubing size covers more applications, reducing inventory requirements.\u003c\/p\u003e\n\u003cp\u003e► Hermetic Fuel \u0026amp; Moisture Seal\u003cbr\u003eThe fuel-resistant adhesive inner liner melts and flows under shrink pressure, creating a 360° bonded seal that blocks diesel, oil, water, salt, and road grime from reaching electrical connections. Prevents corrosion and intermittent electrical failures in harsh under-hood environments.\u003c\/p\u003e\n\u003cp\u003e► Superior Mechanical \u0026amp; Abrasion Protection\u003cbr\u003eThe thick-walled construction provides robust abrasion resistance and mechanical protection against vibration, chafing, and impact — essential for heavy-duty truck, construction, and agricultural equipment wiring that experiences constant movement and wear.\u003c\/p\u003e\n\u003cp\u003e► UL VW-1 Flame Retardant Outer Wall\u003cbr\u003eThe modified polyolefin outer jacket meets UL 224 VW-1 vertical burn requirements, supporting compliance with automotive and industrial electrical safety standards.\u003c\/p\u003e\n\u003cp\u003e► Long-Term Thermal Aging Stability\u003cbr\u003eCross-linked molecular structure resists thermal oxidation and embrittlement at elevated temperatures, ensuring years of reliable service in engine compartment environments.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTYPICAL APPLICATIONS\u003c\/p\u003e\n\u003cp\u003e🚚 Heavy-Duty Diesel Trucks \u0026amp; Commercial Vehicles\u003cbr\u003e• Diesel engine wiring harness repairs\u003cbr\u003e• Fuel injector connector sealing\u003cbr\u003e• Exhaust gas temperature (EGT) sensor wiring\u003cbr\u003e• ECM and engine sensor connections\u003cbr\u003e• Battery cable and starter splices\u003c\/p\u003e\n\u003cp\u003e🚜 Construction \u0026amp; Agricultural Equipment\u003cbr\u003e• Tractor and excavator engine bay wiring\u003cbr\u003e• Diesel fuel system electrical connections\u003cbr\u003e• Heavy equipment sensor and solenoid wiring\u003cbr\u003e• Cab and chassis harness transitions\u003c\/p\u003e\n\u003cp\u003e⛵ Marine Diesel Engines\u003cbr\u003e• Boat diesel engine room wiring\u003cbr\u003e• Fuel injector and sensor cable sealing\u003cbr\u003e• Generator set electrical connections\u003cbr\u003e• Saltwater-exposed engine wiring harnesses\u003c\/p\u003e\n\u003cp\u003e⚡ Diesel Generators \u0026amp; Standby Power\u003cbr\u003e• Generator engine wiring and control harnesses\u003cbr\u003e• Fuel solenoid and sensor connections\u003cbr\u003e• Genset panel wiring splices\u003cbr\u003e• Outdoor standby generator cable sealing\u003c\/p\u003e\n\u003cp\u003e🏭 Industrial Diesel-Powered Machinery\u003cbr\u003e• Forklift and material handling equipment wiring\u003cbr\u003e• Compressor and pump engine electrical systems\u003cbr\u003e• Mining equipment diesel engine harnesses\u003cbr\u003e• Railroad and locomotive wiring repairs\u003c\/p\u003e\n\u003cp\u003e🔧 Fleet Maintenance \u0026amp; Repair Shops\u003cbr\u003e• Universal harness repair solution for diesel-powered fleets\u003cbr\u003e• Connector pigtail replacement and sealing\u003cbr\u003e• Wire splice insulation in fuel-exposed areas\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eINSTALLATION INSTRUCTIONS\u003c\/p\u003e\n\u003cp\u003eRequired Tools: Heat gun (minimum 350°C output), heat-resistant gloves, utility knife or tubing cutter\u003c\/p\u003e\n\u003cp\u003eStep 1 — Preparation\u003cbr\u003eCut tubing to the required length using a sharp blade or tubing cutter. Allow a minimum overlap of 15–20 mm on each side of the splice or connector to ensure adequate seal length. Deburr cut edges cleanly.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Placement\u003cbr\u003eSlide the tubing over the cable and position it centrally over the splice, connector, or repair area before completing the electrical connection.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Heat Application\u003cbr\u003eApply heat uniformly using a heat gun set to 350–400°C. Begin heating from the center of the tubing and work progressively outward toward each end. Keep the heat source moving continuously to avoid scorching the surface or overheating the adhesive.\u003c\/p\u003e\n\u003cp\u003eStep 4 — Verification\u003cbr\u003eContinue heating until the tubing has fully conformed to the underlying profile and a continuous bead of adhesive extrudes from both ends, confirming complete circumferential sealing. No wrinkles, bridging, or air bubbles should be visible.\u003c\/p\u003e\n\u003cp\u003eStep 5 — Cooling \u0026amp; Inspection\u003cbr\u003eAllow the assembly to cool naturally. Once cooled, verify full recovery, uniform adhesive coverage, and a tight, wrinkle-free finish. The sealed joint should show no movement when subjected to lateral force.\u003c\/p\u003e\n\u003cp\u003eNote: When installing near hot engine components, ensure the tubing is positioned to avoid direct contact with exhaust manifolds or turbocharger housings where temperatures may exceed the 150°C continuous rating.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eQUALITY ASSURANCE \u0026amp; COMPLIANCE\u003c\/p\u003e\n\u003cp\u003e• Manufactured under ISO 9001:2015 certified quality management systems\u003cbr\u003e• Each production lot tested for diesel resistance, shrink ratio, and dielectric performance\u003cbr\u003e• Material traceability and test certificates available upon request\u003cbr\u003e• Custom sizes, colors, and pre-cut lengths available for volume orders (MOQ applies)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePACKAGING OPTIONS\u003c\/p\u003e\n\u003cp\u003e• Bulk Spools: 30m \/ 50m continuous lengths on plastic spools\u003cbr\u003e• Pre-Cut Pieces: Standard or custom-length segments for production use\u003cbr\u003e• Repair Assortment Kits: Multi-diameter kits for fleet and shop maintenance\u003cbr\u003e• Private Label: Custom branding and packaging available for industrial distributors and OEM partners\u003c\/p\u003e","brand":"Juxinsheng InsulTech","offers":[{"title":"φ3.2","offer_id":46273670545642,"sku":null,"price":2.4,"currency_code":"USD","in_stock":true},{"title":"φ4.8","offer_id":46273670578410,"sku":null,"price":3.6,"currency_code":"USD","in_stock":true},{"title":"φ6.4","offer_id":46273670611178,"sku":null,"price":4.8,"currency_code":"USD","in_stock":true},{"title":"φ9.5","offer_id":46273670643946,"sku":null,"price":10.92,"currency_code":"USD","in_stock":true},{"title":"φ12.7","offer_id":46273670676714,"sku":null,"price":14.82,"currency_code":"USD","in_stock":true},{"title":"φ19.1","offer_id":46273670709482,"sku":null,"price":25.35,"currency_code":"USD","in_stock":true},{"title":"φ25.4","offer_id":46273670742250,"sku":null,"price":48.75,"currency_code":"USD","in_stock":true},{"title":"φ38.1","offer_id":46273670775018,"sku":null,"price":75.6,"currency_code":"USD","in_stock":true},{"title":"φ50.8","offer_id":46273670807786,"sku":null,"price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/9798\/9866\/files\/3X4X_bc5dbdac-a967-4034-9ffa-38771e9ae744.jpg?v=1789127878","url":"https:\/\/www.juxinson.com\/products\/diesel-resistant-high-temperature-adhesive-heat-shrink-tubing-150-c-rated-dual-wall-fuel-oil-proof-heatshrink-for-diesel-engines","provider":"Juxinsheng InsulTech","version":"1.0","type":"link"}